Re: Star craft or any other diagrams
Posted byDenis A (64.12.103.27) on April 07, 2002 at 09:35:54:
In Reply to:Star craft or any other diagrams posted by Greg on January 07, 2002 at 18:53:44:
Here is a tip about your Starcraft, get a good stud finder and electric battery current finder, the type you point at a wire and it tells you it is hot. Then you use the stud finder to find the braces and then ground to your boat battery to hull and use the electric tester to find the fasteners to remove them. Also I would fill the bottom with water and then look under the boat to find the ones that are leaking as you mite only have a few. And they can be fixed with JB weld under water after a good sanding then repaint. Now as for drying I have found that to run a low heat heater and a inline blower, blowing under the floor from the bow and or transom will do it. It mite take a couple of days but will work and dry it completely. Denis
