Ol' Paw's Fishing Board

Ol' Paw's Fishin' Board

	Bob Delneros Fishing Page

Postings on motors and aluminum boats should be posted on the Aluminum boat and motor repair board Please let's get this board back on the Fishin' track.

[ Post Message |[an error occurred while processing this directive] Visitors since 4/24/98 | FAQ | Ol' Paw's Fishin Page | The Aluminum Boat & Motors Repair Board ]

This is not a for sale or for rent bulletin board so do not post items for sale or rent or "contact me" for such and such. If you feel you can sell something to the poster, contact them direct.

1979 suzuki 50 hp outboard magneto stator - jim campbell 17:37:06 08/05/02 (0)
This Board has been down but now it is up - Ol Paw 14:53:23 08/05/02 (0)
Johnson SeaHorse 10 - Brad 18:51:39 04/29/02 (0)
shimano bantam 100 - tom baldwin 15:32:05 04/29/02 (0)
Motor type - Warren 10:07:51 04/29/02 (0)
59 Johnson 5.5hp Carb. Settings - T. Dyer 09:00:42 04/29/02 (1)
- Re: 59 Johnson 5.5hp Carb. Settings - Chinewalker 13:33:23 04/29/02 (0)
Evinrude Decals - Dave Dulaney 06:43:57 04/29/02 (0)
motor shaft - Billy Sutton 20:20:42 04/28/02 (0)
Rebuilding Motor - Tim 18:59:33 04/28/02 (0)
Needed 25 hp lower unit - Pat H 17:21:12 04/28/02 (0)
DEEP SEA FISHING TRIP TRADE - captwalt 14:09:53 04/28/02 (0)
WILL TRADE FOR A SLIDE IN TRCK CAMPER - CAPT WALT 14:00:41 04/28/02 (0)
parts and service manual - rich 13:57:18 04/28/02 (0)
Looking for 8 HP Suzuki Lower UNIT - CAPTWALT 13:54:42 04/28/02 (0)
What year elgin? - Marty 07:02:58 04/28/02 (0)
Removing the impeller on a Sears Gamefisher 15HP - Rod 03:16:17 04/28/02 (1)
- Re: Removing the impeller on a Sears Gamefisher 15HP - Bobber 11:18:27 04/28/02 (0)
Evinrude Aquanaut - Dennis 19:17:54 04/27/02 (0)
Sheer pins - Rick 15:02:01 04/27/02 (0)
Eagle Magna II + Fish finder - J Durr 09:21:16 04/27/02 (0)
Parts Manual needed for Chrysler 15 HP boat motor - Page K 21:25:04 04/26/02 (0)
1985 sea king ob - Gale 23:06:46 04/25/02 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 14:34:34 04/25/02 (0)
Looking for carb rebuild kit for Evinrude Aquanaut - Dennis 09:07:39 04/25/02 (0)
fuel mixture for 10HP Johnson 1956 - joe 18:02:47 04/24/02 (1)
- Re: fuel mixture for 10HP Johnson 1956 - Chinewalker 14:51:36 04/26/02 (0)
Help! What year is my motor? - Marius 14:48:43 04/24/02 (0)
Wanted: Crankshaft and Flywheel for 1974 150hp Evinrude - Jane 13:13:53 04/24/02 (0)
LOOKING FOR Evinrude aquanaut or Johnson airbouy - Dennis Bruns 20:41:59 04/23/02 (2)
- In need of carb rebuild kit and reed valves for aquanaut - dennis 21:23:02 04/24/02 (0)
- In need of carb rebuild kit and reed valves - dennis 21:22:22 04/24/02 (0)
Sears Ted Williams outboard motors - Daniel Hageli 18:18:03 04/23/02 (0)
submerged motor? - Jon 10:53:23 04/23/02 (2)
- Re: submerged motor? - Jon 17:08:06 04/24/02 (0)
- Re: submerged motor? - Chinewalker 09:42:54 04/24/02 (1)
Needed! Carburator for eska 2.5hp outboard - Matt 20:22:44 04/22/02 (0)
Need wiring diagram for 59 Evinrude Lark 35hp - nitedragons 19:22:42 04/22/02 (0)
Sea King 5 HP Info - Chris 14:50:22 04/22/02 (2)
- Re: Sea King 5 HP Info - bobber 23:21:33 04/22/02 (1)
  - Re: Sea King 5 HP Info - Chris 09:10:32 04/23/02 (0)
motorguide trolling motor - parts list - TRIPP SANDERS 08:26:06 04/22/02 (0)
65 Johnson Carb. settings - Tom Dyer 08:05:46 04/22/02 (0)
2hp Evinrude hard to start - LOUIS 20:33:04 04/20/02 (0)
2hp Evinrude - LOUIS 20:31:42 04/20/02 (0)
evinrude 2 hp motor - Marius Goguen 18:54:15 04/20/02 (0)
Evinrude Aquanaut or Johnson Airbuoy - Dennis Bruns 09:28:32 04/20/02 (0)
EVINRUDE FASTWIN 15hp PARTS NEEDED - Shelby 08:44:54 04/20/02 (1)
- Re: EVINRUDE FASTWIN 15hp PARTS NEEDED - ron 17:11:52 04/20/02 (0)
Sea King 6 h.p. Gas Mixture - Jessie Leon 01:04:51 04/20/02 (0)
spools - dennis 23:46:29 04/19/02 (0)
spools - dennis 23:32:23 04/19/02 (1)
- Re: spools - dennis 23:34:08 04/19/02 (0)
spools - dennis 23:29:24 04/19/02 (0)
Need a Clinton Apache water pump impeller. - Sean P. Collins 19:24:14 04/19/02 (0)
Johnson Model Year - Jay Merrill 18:16:20 04/19/02 (0)
1961 seaking boat - superman 22:17:11 04/18/02 (0)
1955 Johnson seahorse 25 - Randy in Spokane 22:33:54 04/17/02 (0)
merc 50hp - DEan 20:48:37 04/17/02 (1)
- Re: merc 50hp - ledgefinder 18:53:59 08/05/02 (0)
GAMEFISHER 15 HP MOTOR - RICH BROWN 19:23:54 04/17/02 (5)
- Re: GAMEFISHER 15 HP MOTOR - ron 17:18:23 04/20/02 (0)
- Re: GAMEFISHER 15 HP MOTOR - RICH BROWN 19:26:20 04/17/02 (3)
  - Re: GAMEFISHER 15 HP MOTOR - Tolga Hatunoglu 14:06:19 04/18/02 (0)
  - Re: GAMEFISHER 15 HP MOTOR - RICH BROWNB 19:27:08 04/17/02 (1)
    - Re: GAMEFISHER 15 HP MOTOR - major 21:06:51 04/18/02 (0)
Apache outboard motor - Ken Wilkinson 15:35:03 04/17/02 (0)
JOHNSON - R.SANDERS 11:48:04 04/17/02 (2)
- Re: JOHNSON - sportsmarine 16:53:43 04/17/02 (0)
- Re: JOHNSON - sportsmarine 16:52:27 04/17/02 (0)
Johnson sea horse 5 hp - Newton Baladwin 07:26:59 04/17/02 (1)
- Re: Johnson sea horse 5 hp - Tolga Hatunoglu 14:07:42 04/18/02 (0)
Fishing Reel - Josh 01:31:42 04/17/02 (0)
1956 Evinrude Fleetwin 7.5 - Marcus PLEASE !!!!!!HELP!!!!!!!! 17:31:50 04/16/02 (1)
- Re: 1956 Evinrude Fleetwin 7.5 - major 19:28:48 04/16/02 (0)
1964 johnson out board - dudlydudly2002 20:01:26 04/15/02 (1)
- Re: 1964 johnson out board - major 19:31:54 04/16/02 (0)
year of a Goodyear boat motor - Robert Hodgeman 15:44:17 04/15/02 (1)
- Re: year of a Goodyear boat motor - sportsmarine 17:00:37 04/17/02 (0)
1979 johnson - david 11:45:52 04/15/02 (1)
- Re: 1979 johnson - major 19:37:35 04/16/02 (0)
1984 evinrude 9.9 help! - joe 18:04:42 04/14/02 (0)
Mariner 5hp air-cooled. - Dirk DeJong 05:25:42 04/14/02 (2)
- Re: Mariner 5hp air-cooled. - Mike Bleakley 19:33:32 04/18/02 (0)
- Re: Mariner 5hp air-cooled. - Mike Bleakley 19:24:23 04/18/02 (0)
Daiwa 7000c - Roger Griswold 12:58:55 04/13/02 (0)
Starter and bracket for 35HP Johnson - Ron Pezda 22:27:28 04/12/02 (0)
4 HP Sea King by Chrysler - Dave 17:58:29 04/12/02 (0)
Montgomery Ward reel - ROBBY MILES 13:20:19 04/12/02 (0)
4 stroke outboard motors - Mike 18:10:33 04/11/02 (1)
- Re: 4 stroke outboard motors - LENNY 12:30:55 04/23/02 (0)
Sea King 15hp-please help - Brad 17:12:06 04/11/02 (0)
WTD: Tillotson MS5A carb - John 14:19:50 04/11/02 (0)
Ryobi V Mag 3 - Robert Gauthier 12:28:40 04/11/02 (0)
5.5 HP Sears outboard - Shannon 08:08:27 04/11/02 (5)
- Re: 5.5 HP Sears outboard Model 571.50551 - Ralph White 10:50:36 04/22/02 (0)
- Re: 5.5 HP Sears outboard - Ralph White 11:00:22 04/20/02 (0)
- Re: 5.5 HP Sears outboard model 57158531 - Ralph White 10:18:24 04/18/02 (0)
- Re: 5.5 HP Sears outboard - major 22:17:17 04/16/02 (2)
- Re: 5.5 HP Sears outboard - shannon 05:42:43 04/12/02 (4)
Sea King Outboard - Rocky 20:24:14 04/10/02 (3)
- Re: Sea King Outboard - Tom Mundy 21:35:52 04/10/02 (0)
  - Re: Sea King Outboard - Rocky 17:17:35 04/11/02 (0)
    - Re: Sea King Outboard - adam rich 21:17:24 04/13/02 (0)
Mitchell reel parts - Eric Stemple 09:29:11 04/10/02 (1)
- Re: Mitchell reel parts - Richard Trimble 19:22:24 04/25/02 (0)
Mitchell 4430 & CARDINAL 753 - Robert Gauthier 20:57:41 04/09/02 (0)
1959 50h Evanrude Golden Jubilee - No Spark - Jerry 20:29:52 04/08/02 (0)
shakespeare reels model #1810 and 1870 spin casting - jason vicchiariello 10:32:02 04/08/02 (0)
Ryobi MG1 - peter 09:34:27 04/07/02 (0)
Neptune Mighty Mite Carb - Jerry 18:22:49 04/06/02 (1)
- Re: Neptune Mighty Mite Carb - Bobby 19:44:22 04/06/02 (0)
Chrysler 9.6 parts - Leon 20:27:49 04/05/02 (0)
73 evinrude 40hp - chris 10:58:07 04/05/02 (1)
- Re: 73 evinrude 40hp - chris 11:46:18 04/27/02 (0)
Lake Ray Roberts, TX - Monte 04:00:13 04/05/02 (0)
JOHNSON 3 BLADE PROP 7.5 HP - RICH 20:08:08 04/04/02 (2)
- Re: JOHNSON 3 BLADE PROP 7.5 HP - mark 17:26:58 04/09/02 (0)
- Re: JOHNSON 3 BLADE PROP 7.5 HP - Chinewalker 09:55:55 04/08/02 (0)
eagle claw ec88b spincast reel handle? - terry 17:30:05 04/04/02 (0)
ryobi - joel 15:10:35 04/04/02 (1)
- Re: ryobi - Peter 09:28:54 04/07/02 (0)
Johnson 70 - R.L. Sanders 14:48:23 04/04/02 (0)
mitchell 300 excellence line cap? - elmo 12:24:08 04/03/02 (1)
- Re: mitchell 300 excellence line cap? - D. Friedrichs 13:32:50 04/06/02 (0)
looking for a coil for a old evenrude - Harlan Gillespie 19:30:41 04/02/02 (1)
- Re: looking for a coil for a old evenrude - mark 17:30:15 04/09/02 (0)
calcutta 200 parts diagram - RTB 22:07:03 04/01/02 (0)
1964 Sea King instrument panel - Lichen 10:43:16 04/01/02 (0)
1964 Sea King instrument panel - Lichen 10:42:52 04/01/02 (0)
Indiana's Premiere Pay Lakes - Coomer's Six Lakes Fishing Park 14:26:31 03/31/02 (0)
NEED INFO ON A BUCCANEER GALE MOTOR - ANNA 18:35:27 03/30/02 (1)
- Re: NEED INFO ON A BUCCANEER GALE MOTOR - ted 17:55:12 03/31/02 (0)
OMC VRO Pump replacement - Rich C 10:35:26 03/30/02 (0)
carb. settings - scott 23:00:45 03/29/02 (1)
- Re: carb. settings - Pat H 19:47:25 04/01/02 (0)
What year is my 7.5 gamefisher - fisherman_82 19:57:31 03/29/02 (0)
Freshwater fishing in NJ? - Lee Everhart 19:48:11 03/29/02 (0)
33XBL Zebco fishing reel - Bill Washington 19:14:02 03/29/02 (0)
Sears Sea King 7.5 horsepower outboard - Tonya 16:10:05 03/29/02 (0)
need a motor........plz - Joe B 16:05:27 03/29/02 (0)
Johnson 7.5HP Seahorse - Des Cavin 11:47:21 03/29/02 (1)
- Re: Johnson 7.5HP Seahorse - major 15:35:35 04/07/02 (0)
Spark trouble on SeaKing 9.6??? - Leon 18:19:47 03/28/02 (2)
- Re: Spark trouble on SeaKing 9.6??? - Leon 19:44:32 03/28/02 (1)
  - Re: Spark trouble on SeaKing 9.6??? - Tolga Hatunoglu 10:35:21 03/29/02 (0)
Information about Langley De-Liars - Howard 16:27:38 03/28/02 (0)
Johnson SeaHorse - John 15:08:55 03/28/02 (0)
Johnson SeaHorse - John 15:08:04 03/28/02 (0)
Sears Ted Williams 7.5 Oil Mix? - Michael 11:06:56 03/28/02 (1)
- Re: Sears Ted Williams 7.5 Oil Mix? - Tolga Hatunoglu 10:38:10 03/29/02 (0)
Looking for a lower cowl for 1952 Johnson TN 28 5hp - rodney 09:59:33 03/28/02 (0)
What year is this elgin? - JP 07:11:45 03/28/02 (2)
- 2 HP elgin - CAPT WALT 13:58:13 04/28/02 (0)
- Re: What year is this elgin? - RUSS 08:20:21 03/30/02 (0)
what year is my johnson outboard? - Jeff 07:00:47 03/28/02 (1)
- Re: what year is my johnson outboard? - sportsmarine 17:08:04 04/17/02 (0)
1975 Evanrude repair manual 40 horse power - DJ 10:09:23 03/27/02 (0)
need new coleman crawdad information - todd 09:48:00 03/27/02 (0)
Re: alcedo micron-I inserted a matchstick in the bale hole. - Theodore Scott Kern 23:17:50 03/25/02 (1)
- Re: alcedo micron-I inserted a matchstick in the bale hole. - Nick 15:07:35 03/26/02 (0)
ABU/GARCIA CARDINAL REELS and KUNAN RODS - Crow 13:55:00 03/25/02 (0)
what year is my sea king - jim 22:09:24 03/24/02 (0)
tilt and stearing housing for a 7.5 eska - Kevin 15:18:15 03/24/02 (0)
LeJay electrol outboard motor - irvin 12:40:52 03/24/02 (0)
55 HP Johnson motor problems - Joe 10:17:51 03/24/02 (1)
- Re: 55 HP Johnson motor problems - major 12:57:19 03/24/02 (0)
need lower unit 6hp crys. - rich 19:45:01 03/23/02 (0)
crys 6hp low unit - RICH YOUNG 19:35:43 03/23/02 (0)
looking for parts - MARK 19:12:22 03/23/02 (1)
- Re: looking for parts - William Olsen 12:04:05 03/31/02 (0)
Sears Ted Williams 7.5hp - Fishman 19:49:21 03/21/02 (1)
- Re: Sears Ted Williams 7.5hp - Bobby 04:14:07 03/22/02 (0)
Sears ted williams 15 h.p. outboard - Doug axtell 16:12:27 03/21/02 (1)
- Re: Sears ted williams 15 h.p. outboard - Guy Yoes 12:40:30 04/13/02 (0)
7.5 wards engine air cooled need help - Steve 13:20:35 03/21/02 (2)
- Re: 7.5 wards engine air cooled need help - Bobby 11:52:57 03/22/02 (0)
- Re: 7.5 wards engine air cooled need help - Bobby 04:12:11 03/22/02 (1)
LOSS OF POWER ? 1978 MERC INLINE 150HP - JAMES JOHNSON 10:10:52 03/21/02 (3)
- Re: LOSS OF POWER ? 1978 MERC INLINE 150HP - JAMES JOHNSON 11:39:27 03/22/02 (1)
- Re: LOSS OF POWER ? 1978 MERC INLINE 150HP - Chinewalker 10:28:19 03/21/02 (2)
  - Re: LOSS OF POWER ? 1978 MERC INLINE 150HP - Chinewalker 10:52:30 03/25/02 (0)
trim tab studs - Ken 09:13:58 03/21/02 (0)
Anise - Gone Fishen 06:54:01 03/20/02 (1)
- Re: Anise - Jim 13:42:10 03/22/02 (0)
NEEDED ASAP for a 9.9 Merc - Pat Haefner 05:37:03 03/20/02 (0)
7.5 Sea King - Help with ID/Yr/Parts/Manual - Marty 23:37:45 03/19/02 (1)
- Re: 7.5 Sea King - Help with ID/Yr/Parts/Manual - TDHoward 09:22:58 03/21/02 (0)
What year is my Evinrude 140 HP - Dave Iveson 18:36:36 03/19/02 (1)
- Re: What year is my Evinrude 140 HP - major 18:57:59 03/19/02 (0)
Need 1973 Ted Williams 7.5 hp motor Part - Crawford Dorough 10:07:47 03/19/02 (4)
- Re: Need 1973 Ted Williams 7.5 hp motor Part - TDHoward 09:10:49 03/21/02 (0)
- Re: Need 1973 Ted Williams 7.5 hp motor Part - Jeff Roye 12:16:40 03/20/02 (0)
- Re: Need 1973 Ted Williams 7.5 hp motor Part - Jeff Roye 12:14:57 03/20/02 (0)
  - Re: Need 1973 Ted Williams 7.5 hp motor Part - Bruce Hanna 05:29:33 04/08/02 (0)
    - Re: Need 1973 Ted Williams 7.5 hp motor Part - Dale Beaudry 10:46:40 04/13/02 (0)
Where can I get parts?? - Randy Reinhardt 09:56:20 03/19/02 (1)
- Re: Where can I get parts?? - ron 17:00:35 03/23/02 (0)
Garcia Mitchell 300A parts - Justin Howell 09:29:42 03/19/02 (0)
Outboard Motors - Jerry Cole 21:18:48 03/18/02 (4)
- Re: Outboard Motors - ron 14:12:03 03/19/02 (0)
- Re: Outboard Motors - ron 14:10:54 03/19/02 (1)
- Re: Outboard Motors - Chinewalker 08:26:47 03/19/02 (0)
- Re: Outboard Motors - Bobby 00:10:37 03/19/02 (0)
Diawa Triforce-x 150i Baitcaster Exploded Diagram - Martyn Tonks 18:17:18 03/18/02 (0)
holidays fishing in spain - fishing holidays in spain 15:18:11 03/18/02 (0)
Evenrude Triumph 55 HP - Wanda Jones 16:45:42 03/17/02 (4)
- Re: Evenrude Triumph 55 HP - major 19:40:13 03/17/02 (0)
- Re: Evenrude Triumph 55 HP - major 19:34:33 03/17/02 (2)
  - Re: Evenrude Triumph 55 HP - Wanda Jones 20:10:40 03/19/02 (0)
  - Re: Evenrude Triumph 55 HP - major 19:36:33 03/17/02 (1)
hunting coil,points,condensorfor a clinton outboard - Ron 14:45:44 03/17/02 (1)
- Re: hunting coil,points,condensorfor a clinton outboard - Tolga Hatunoglu 07:55:51 03/18/02 (0)
need Chrysler motor - dennis 13:14:02 03/17/02 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 14:11:16 03/16/02 (0)
Sears 1.2 HP Air cooled OB - JW 13:38:55 03/16/02 (0)
Need bail for RYOBI MGT 4 - Rodney Thurman 11:31:24 03/16/02 (0)
Ryobi MGT4 Graphite - Rodney Thurman 11:27:56 03/16/02 (1)
- Re: Ryobi MGT4 Graphite - Peter 09:31:22 04/07/02 (0)
Lake Ray Roberts, TX Fishing Report - Monte 04:54:57 03/16/02 (0)
johnson 20 horse sea horse - jeffb p. 19:04:07 03/14/02 (1)
- Re: johnson 20 horse sea horse - boatguy 21:01:20 03/16/02 (0)
need help about eninrude - john 12:42:53 03/14/02 (2)
- Re: need help about eninrude - boatguy 16:31:08 03/14/02 (1)
  - Thanks boatguy need help about eninrude - john 22:09:06 03/14/02 (0)
alcedo micron - Nick 18:00:24 03/13/02 (3)
- Re: alcedo micron -What does an Alcedo Micron from the sixties go for ? - Nick 15:10:40 03/26/02 (0)
- Re: alcedo micron -What does an Alcedo Micron from the sixties go for ? - Nick 15:03:11 03/26/02 (0)
- Re: alcedo micron -What does an Alcedo Micron from the sixties go for ? - Theodore Scott Kern 23:14:24 03/25/02 (2)
Info on older Evinrude - Chuck 17:57:34 03/13/02 (1)
- Re: Info on older Evinrude - major 19:00:31 03/13/02 (0)
what year and hp is this elgin? - JJ 16:39:49 03/13/02 (1)
- Re: what year and hp is this elgin? - Bobby 02:04:25 03/14/02 (0)
fishing trip - steve hawkins 13:31:32 03/13/02 (0)
aqua-bug motor boats parts - dale derrick 03:18:39 03/13/02 (0)
9.9 Gamefisher parts - Stacie 12:34:42 03/12/02 (1)
- Re: 9.9 Gamefisher parts - Tim 07:09:31 03/19/02 (0)
Sears 1975 9.9hp outboard- spark advance assy - William Gribble 00:05:18 03/12/02 (0)
Reels - H Stehlik 21:53:36 03/11/02 (0)
help...i need a motor - Joe D 23:12:31 03/10/02 (0)
1955 EVINRUDE 15 hp PARTS - Shelby Wilson 08:42:31 03/10/02 (0)
1955 EVINRUDE 15 HP - Shelby Wilson 08:31:53 03/10/02 (0)
1965 Johnson 18hp - FD19D #J2536452 - Bill Washington 13:16:09 03/09/02 (1)
- Re: 1965 Johnson 18hp - FD19D #J2536452 - ron 14:18:12 03/19/02 (0)
Part of the History of Overfishing Salmon - Max Ledbetter 12:02:02 03/09/02 (0)
Decals for Sea King - Glenn 10:50:34 03/09/02 (0)
pflueger seaking reel - Raymond Heap 08:29:55 03/09/02 (1)
- Re: pflueger seaking reel - Big Dave 09:24:48 03/18/02 (0)
looking for part for Garcia-mitchell 400 - joe rodrigues 02:40:03 03/08/02 (0)
Garcia Mitchel 622 (Salt baitcaster) - Randy 13:10:11 03/07/02 (0)
Tennessee fishing reports and info - Lee 21:22:58 03/06/02 (0)
Bluefin tuna 300m from the shore - Myles 04:32:30 03/06/02 (0)
can a transducercable be spliced - Stehlik 03:58:19 03/06/02 (2)
- Re: can a transducercable be spliced - Bob 05:54:29 03/30/02 (1)
  - Re: can a transducercable be spliced - Bob 05:59:31 03/30/02 (0)
Sears/Eska 7.5 HP magneto - Jeff Roye 18:47:45 03/05/02 (2)
- Re: Sears/Eska 7.5 HP magneto - Joe D 18:28:47 03/06/02 (0)
- Re: Sears/Eska 7.5 HP magneto - TDHoward 08:20:06 03/06/02 (0)
need a motor....1989 omc 4 cyl 3.0 - Joe D 17:01:18 03/05/02 (1)
- Re: need a motor....1989 omc 4 cyl 3.0 - Joe D 17:04:28 03/05/02 (0)
I am looking for Johnny O'Neil's Weed Wing Lures - Eric Rogers 14:07:23 03/05/02 (0)
used mercury parts - tom 07:04:53 03/05/02 (0)
motorguide t47 - tom 06:55:58 03/05/02 (0)
SEARS ROEBUCK WATER WITCH - TERRY 08:11:24 03/04/02 (0)
Re: garcia-mitchell 300 spinning reel - Don Kribbs 18:34:36 03/03/02 (1)
- Re: garcia-mitchell 300 Excellence spinning reel - Rick P. 15:50:05 03/24/02 (0)
7.5 seaking - steve allen 15:15:28 03/03/02 (1)
- Re: 7.5 seaking - Jim Baker 16:37:36 03/09/02 (0)
Prop for 3hp Johnson - Mike Bleakley 15:08:21 03/03/02 (0)
garcia-mitchell 300 spinning reel - ernie 10:36:36 03/03/02 (0)
boat-value - daniel 06:18:53 03/03/02 (1)
- Re: boat-value - J-Dog 15:46:18 03/14/02 (0)
sea king 25hp - dave 23:41:07 03/02/02 (0)
Bream busters and Crappie poles - Slider 19:52:47 03/02/02 (0)
Quantum reel spools - John Lesko 15:06:15 03/02/02 (0)
59 elgin i think - andy 19:44:08 03/01/02 (3)
- thanks Ted - andy 07:29:25 03/03/02 (0)
- Re: 59 elgin i think - Ted 04:45:42 03/03/02 (0)
- Re: 59 elgin i think - ted 04:40:01 03/03/02 (0)
Great Lakes imperial Whirlaway Spinning Rod & Reel - Ken Viall 18:34:02 03/01/02 (0)
Re: valuation of Neptune outboards - Jim 13:52:26 03/01/02 (0)
SeaKing 6hp - Kurt 10:55:22 03/01/02 (1)
- Re: SeaKing 6hp - Linda Nelson 13:34:59 03/13/02 (0)
Sea King 3 h.p. I think! - Roger Lane 10:14:25 02/28/02 (1)
- Re: Sea King 3 h.p. I think! - Tom 19:52:01 03/01/02 (0)
Head for 1968 Evinrude 33 hp Model 33852R - Rod 22:56:48 02/25/02 (1)
- Re: Head for 1968 Evinrude 33 hp Model 33852R - major 16:02:39 03/09/02 (0)
1978 55hp Johnson Piston - Raymond 18:00:03 02/25/02 (4)
- Re: 1978 55hp Johnson Piston - Anthony 09:48:30 02/26/02 (3)
  - Re: 1978 55hp Johnson Piston - William 12:10:42 03/31/02 (0)
  - Re: 1978 55hp Johnson Piston - Joe 09:56:09 03/24/02 (1)
  - Re: 1978 55hp Johnson Piston - joe 09:53:14 03/24/02 (2)
Need year made Mercury 9.8 - Lynn 16:04:16 02/24/02 (1)
- Re: Need year made Mercury 9.8 - Major 08:40:44 02/27/02 (0)
carburator - TONY MILLER 12:56:40 02/24/02 (1)
- Re: carburator - tony miller 12:58:03 02/24/02 (0)
I need a complete carburator gasket set for seaking outboard - Flora Spencer 12:26:37 02/24/02 (0)
Saganaga Lake (Minnesota) - Fishing Junky 04:55:58 02/24/02 (1)
- Re: Saganaga Lake (Minnesota) - steverino 07:28:27 03/04/02 (0)
year and hp of this motor? - JJ 20:25:44 02/23/02 (1)
- Re: year and hp of this motor? - Bobby 23:44:54 02/27/02 (0)
Cardinal reels - Reid Stone 18:31:03 02/23/02 (2)
- Re: Cardinal reels - Ben 13:43:04 03/25/02 (0)
- Re: Cardinal reels - Kevin 04:53:52 02/24/02 (0)
Need some help! Sears outboard, Canadian mdl#574-59660 - Neil 17:46:04 02/23/02 (0)
servicing and or problems for 1961 40hp evanrude &feul mix - shannon owsley 09:34:04 02/22/02 (0)
Chev 350 exhaust manifold - Bill Curry 05:12:17 02/22/02 (1)
- Re: Chev 350 exhaust manifold - Major 19:38:37 02/23/02 (0)
reading instrument company pyramid sinker mold - John 20:50:36 02/21/02 (0)
Handle for a Mitchell 408 "High Speed" - Burt Umstead 09:25:38 02/20/02 (0)
Diawa 5500RL - David Coley 22:27:18 02/19/02 (0)
Diawa 5500RL - David Coley 22:22:51 02/19/02 (1)
- Re: Diawa 5500RL - David Coley 22:25:20 02/19/02 (0)
WIREING DIAGRAM 402 MERCURY - ARTHUR 21:27:04 02/19/02 (0)
Sears outboard, Model #574-59660. Does anyone know the YR and HP of this motor? - Neil 20:21:04 02/19/02 (0)
lower unit - jake 17:38:50 02/19/02 (0)
What year and hp is my motor? - Jeff 14:31:20 02/19/02 (1)
- Re: What year and hp is my motor? - Ted 18:12:38 02/19/02 (0)
Crysler Outboard model 42HB - David From Australia 04:56:02 02/19/02 (1)
- Re: Crysler Outboard model 42HB - Ted 18:18:02 02/19/02 (0)
Sears outboard, model#574-59660. What hp and yr is this. - Neil 21:42:51 02/18/02 (1)
- Re: Sears outboard, model#574-59660. Anyone know what hp and yr is this. - Neil 17:35:27 02/19/02 (0)
electric reel - John Mosby 21:08:58 02/18/02 (0)
Wards Sea King '70's 6HP motor--need lower drive shaft unit - Linda Nelson 17:49:10 02/18/02 (3)
- Re: Wards Sea King '70's 6HP motor--need lower drive shaft unit - Clay Lewis 20:45:59 04/14/02 (0)
- Re: Wards Sea King '70's 6HP motor--need lower drive shaft unit - Linda Nelson 13:31:34 03/13/02 (0)
- Re: Wards Sea King '70's 6HP motor--need lower drive shaft unit - Kurt 10:45:16 03/01/02 (2)
OMC manifold - Ted Johnson 21:19:58 02/17/02 (0)
old lonestar boats - ron 16:48:37 02/17/02 (1)
- Re: old lonestar boats - ron 16:51:57 02/17/02 (0)
prop - Mike Bleakley 18:04:11 02/15/02 (0)
Placencia Belize Fishing Report - February 15, 2002 - Mary Toy 16:25:14 02/15/02 (0)
Hilts molds - E Stephens 14:38:57 02/15/02 (4)
- Re: Hilts molds - PB 00:16:58 03/04/02 (0)
- Re: Hilts molds - Merc man 07:19:24 02/17/02 (0)
- Re: Hilts molds - Ban This Guy From Old Pal !!!! 17:52:07 02/16/02 (1)
- Re: Hilts molds - assfucker 16:06:41 02/15/02 (2)
Long Beach #65 repairs - Penn Reel - Dennis 13:28:13 02/15/02 (0)
Reply to Ryobi reel parts postings - Ian Henderson 17:57:19 02/14/02 (0)
Working from Home - Kassim Case 13:54:35 02/14/02 (0)
Johnson Sea Horse 150TL 790 ??? - Fernando 13:06:39 02/14/02 (1)
- Re: Johnson Sea Horse 150TL 790 ??? - Major 18:57:19 02/17/02 (0)
I need to find a repair manual for a Montgomery Wards boat motor - David Butler 13:05:01 02/14/02 (0)
What to clean old Penns with? - Todd Maik 11:36:05 02/14/02 (1)
- Re: What to clean old Penns with? - Don Kribbs 18:54:53 03/03/02 (0)
What year is my Johnson outboard? - Dave Jackson 16:05:32 02/13/02 (0)
Porta-Bote - Dave P. 00:36:32 02/13/02 (0)
Solinoids for 1972 50hp Evinrude lower unit - Garry 17:45:26 02/12/02 (0)
Wanted:Wards seaking carb 5hp - Kevin Piepkorn 12:57:31 02/12/02 (0)
Sears 1971 5 HP - Dirk 11:12:07 02/12/02 (4)
- Re: Sears 1971 5 HP - Tolga Hatunoglu 12:49:12 02/12/02 (3)
  - Re: Sears 1971 5 HP - Dirk 12:49:44 04/17/02 (0)
  - Re: Sears 1971 5 HP - Dirk 12:49:36 04/17/02 (0)
  - Re: Sears 1971 5 HP - Jeff 18:44:30 03/05/02 (2)
saltwater fish identification - Don R 05:41:24 02/12/02 (0)
alcedo micron - robert gledhill 18:09:22 02/11/02 (0)
evenrude sportsman 4412-0641 - butch gibson 16:09:39 02/11/02 (2)
- Re: evenrude sportsman 4412-0641 - Chinewalker 14:52:24 02/14/02 (0)
- Re: evenrude sportsman 4412-05641 - butch g 16:11:18 02/11/02 (0)
evenrude sportsman ser#4412-05641 - butch g 14:16:33 02/11/02 (0)
evenrude outbord motor #4412-05641 - butch gibson 13:57:07 02/11/02 (0)
Smelt Boom Net - AL 12:48:44 02/11/02 (1)
- Re: Smelt Boom Net - CAPTWALT 06:35:05 04/29/02 (0)
Interconnects Organization - Bill Graham 07:04:59 02/11/02 (0)
Bail springs please for my Mitchell Reels!!! - T.Maik 13:34:40 02/10/02 (3)
- Re: Bail springs please for my Mitchell Reels!!! - kevin 08:16:50 02/11/02 (2)
  - Re: Bail springs please for my Mitchell Reels!!! - kevin 12:36:18 02/12/02 (0)
  - Re: Bail springs please for my Mitchell Reels!!! - T. Maik 15:45:42 02/11/02 (1)
Looking for crank handle for Penn 700 - T. Maik 13:30:55 02/10/02 (0)
Looking for old Penn "Greenie" Spinfisher reels - T. Maik 13:09:33 02/10/02 (0)
Looking for old wooden saltwater lures - T. Maik 13:04:23 02/10/02 (0)
Help for old Evinrude - Garry 20:38:16 02/09/02 (1)
- Re: Help for old Evinrude - T. Maik 13:22:03 02/10/02 (0)
Lower unit oil for 1990 Johnson 115hp - Garry 20:24:18 02/09/02 (0)
Need Bass Pictures - Bass Magnet 16:04:30 02/09/02 (0)
march trip - mr joe 05:22:28 02/08/02 (0)
Sears 7hp - Tim Davis 17:09:33 02/07/02 (1)
- Re: Sears 7hp - Tom Mundy 07:45:52 02/08/02 (0)
SOHO motors - scott 14:17:15 02/07/02 (0)
Pflueger Supreme bait casting reel - Joe 11:42:16 02/07/02 (2)
- Re: Pflueger Supreme bait casting reel - Joe 16:28:15 02/10/02 (0)
- Re: Pflueger Supreme bait casting reel - Donny 15:35:05 02/09/02 (1)
Evenrude 4 hp - Rob McMullen 12:27:44 02/06/02 (2)
- Re: Evenrude 4 hp - Mike Bleakley 18:11:00 02/16/02 (0)
- Re: Evenrude 4 hp - Pat H 20:29:56 02/06/02 (0)
fileting northern pike - Al Smith 10:34:08 02/06/02 (1)
- Re: fileting northern pike - kevin 12:38:27 02/12/02 (0)
merc 654 4 cyl - Joe 05:23:27 02/06/02 (0)
hot n tot lures - frank rogo 19:33:50 02/05/02 (0)
70 HP Evinrude - Sterling Perrine 14:17:00 02/05/02 (2)
- Re: 70 HP Evinrude - T. Maik 12:46:04 02/10/02 (0)
- Re: 70 HP Evinrude - Ricky 05:59:17 02/06/02 (0)
Work in Cannery - Jim Moorhead 14:15:41 02/05/02 (0)
Johnson 9.5 Question - Tolga Hatunoglu 14:09:38 02/05/02 (1)
- Re: Johnson 9.5 Question - Pat H 20:27:01 02/06/02 (0)
Aerial Surveillance - Max Ledbetter 11:59:18 02/05/02 (1)
- Re: Aerial Surveillance - Max Ledbetter 11:59:44 03/09/02 (0)
Ten Anglers of Texas in Nicaragua: 1000 fish, Tarpon. Mojara, Bass - Philippe Tisseaux 11:35:32 02/05/02 (0)
Rod and Reel Repair - Tom Kirkman 18:42:37 02/04/02 (0)
Daiwa TD2hi parts schematic needed - Jody Haney 16:35:23 02/04/02 (0)
parts for an old 7hp Sea King outboard - J.A. Laisure 11:36:43 02/04/02 (0)
Who makes the best aluminum boat? - Newhook 10:41:22 02/04/02 (1)
- Re: Who makes the best aluminum boat? - Andrew Steiger 20:37:31 02/09/02 (0)
7.5 Gamefhisher carb diaphram - Will Henderson 13:09:19 02/02/02 (2)
- Re: 7.5 Gamefhisher carb diaphram - Tolga Hatunoglu 10:35:54 02/05/02 (0)
- Re: 7.5 Gamefhisher carb diaphram - TDHoward 07:23:30 02/04/02 (0)
shallow water motor built like a tank - im_shooting 21:32:41 02/01/02 (0)
Boom Net- Ronald French-phone me - Al Klebek 18:56:35 02/01/02 (0)
mercury efi150 - rob 08:07:00 01/31/02 (1)
- Re: mercury efi150 - Terry 20:12:58 02/02/02 (0)
DEEP SEA FISHING Trade - CAPTWALT 12:34:53 01/29/02 (0)
Evinrude 9.9 - 15 hp conversion - KenB 11:25:40 01/29/02 (2)
- Re: Evinrude 9.9 - 15 hp conversion - Pat 17:37:39 02/04/02 (1)
  - Re: Evinrude 9.9 - 15 hp conversion - Brian 08:44:56 02/13/02 (0)
1974 johnson 70 hp. fuel pump? - Ricky 00:16:59 01/29/02 (0)
4 1/2 hp Sears Ted Williams aircooled boat motor - Gary 17:31:36 01/27/02 (3)
- Re: 4 1/2 hp Sears Ted Williams aircooled boat motor - Ted 09:58:14 04/12/02 (0)
- Re: 4 1/2 hp Sears Ted Williams aircooled boat motor - ted 09:39:07 04/12/02 (1)
- Re: 4 1/2 hp Sears Ted Williams aircooled boat motor - TDHoward 07:06:32 02/01/02 (0)
Looking for Reels - John Topper, John's Fishing Tackle Service Center 13:40:27 01/26/02 (0)
Mitchell 300 Excellence Reel Trip Lever - John Topper, John's Fishing Tackle Service Center 13:44:29 01/25/02 (0)
Fishing - FishNut 12:51:27 01/25/02 (0)
KIWI Stealth Kayak - Gary 11:03:21 01/25/02 (0)
gamefisher aircooled - lee 16:36:25 01/23/02 (1)
- possible fuel supply problem - im_shooting 21:22:34 02/01/02 (0)
gamefisher aircooled - lee 16:36:12 01/23/02 (0)
'68 evenrude magnito - le jones 16:24:22 01/23/02 (1)
- Re: '68 evenrude magnito - Gary Garcia 19:08:53 01/28/02 (0)
Storm wiggle warts - Greg 13:22:21 01/22/02 (0)
Catfish and Walleye Articles - Cat Eye Outfitter 05:23:17 01/22/02 (0)
prop & pin - Copoolshrk 18:40:58 01/19/02 (0)
steering cable - Ralph Merideth 15:37:52 01/19/02 (0)
hydra lures - Jerry 13:57:06 01/19/02 (1)
- Re: hydra lures - Tim 20:35:28 03/31/02 (0)
Yamaha 25 four stroke - kevin 13:32:02 01/19/02 (1)
- Re: Yamaha 25 four stroke - Tim 11:54:30 01/21/02 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 15:19:15 01/16/02 (0)
need prop &pin for a old sears Eska 10hp out board - Anthony 15:11:25 01/16/02 (3)
- Re: need prop &pin for a old sears Eska 10hp out board - Fisherman 11:21:17 02/05/02 (0)
- Re: need prop &pin for a old sears Eska 10hp out board - Fisherman 11:20:21 02/05/02 (1)
- Re: need prop &pin for a old sears Eska 10hp out board - Tom Mundy 20:57:23 01/16/02 (2)
mitchell garcia fishing reels - huck 11:57:53 01/16/02 (4)
- Re: mitchell garcia fishing reels - Joe 20:41:48 03/04/02 (0)
- Re: mitchell garcia fishing reels - Justin 14:46:00 03/03/02 (0)
- Re: mitchell garcia fishing reels - Scott 23:58:00 02/07/02 (1)
- Re: mitchell garcia fishing reels - George 17:37:42 01/27/02 (1)
repair recoil starter 1988 2hp Johnson o/b - Gerry 10:37:33 01/16/02 (0)
parts for tillotson carburetor - Brian Williams 18:46:07 01/15/02 (1)
- Re: parts for tillotson carburetor - Bobby Williams 18:52:36 01/15/02 (0)
Re: Mitchell 300 parts - 'witz 11:39:42 01/15/02 (2)
- Re: Mitchell 300 parts - T. maik 12:53:29 02/10/02 (0)
- Re: Mitchell 300 parts - scott - need bail for a 302 Saltwater!!!!! Help 00:00:23 02/08/02 (0)
Aquabug (O&R) outboard - Jeff Arnold 17:41:31 01/14/02 (1)
- Re: Aquabug (O&R) outboard - Bobby 08:02:37 01/20/02 (0)
Need Reel Schematic - Heddon 420 - Tom 07:46:54 01/14/02 (0)
GILFIN 500 - SPOOL WANTED DESPARATLY - Alastair 13:06:34 01/13/02 (0)
Mitchell Reels - Jared 21:53:09 01/12/02 (1)
- Re: Mitchell Reels - T. Maik 11:55:57 02/14/02 (0)
1983 JOHNSON 35HP - DOUG 18:41:01 01/12/02 (0)
smokercraft mellintia recall - Paul 16:57:04 01/12/02 (0)
Channel Catfish and Walleye Articles - Cat Eye Outfitter 21:04:49 01/11/02 (0)
need moter manul - Bob Hutsell 12:42:18 01/11/02 (0)
Reel Schematic - Larry Jordan 09:41:31 01/10/02 (1)
- Re: Reel Schematic - Rick P. 15:57:22 03/24/02 (0)
Kiekhaefer / Mercruiser Inboard - Mike Brady 17:23:56 01/07/02 (0)
johnson outboard - Marion 13:51:57 01/07/02 (0)
Shimano B-100 Mag schematic - Bob Chandler 09:17:46 01/07/02 (1)
- Re: Shimano B-100 Mag schematic - Gary McCraw 23:24:26 01/10/02 (0)
Host for a web site - GregT 14:16:04 01/05/02 (0)
WTB - Whopper Stopper Salty Boogie plugs - Pete 09:08:09 01/05/02 (0)
Old Johnson seahorse - Mikael Appell 04:00:12 01/05/02 (0)
Daiwa BG90 Schematic needed - Jack 09:49:23 01/03/02 (0)
Miramichi river salmon fishing season - Byzie Coughlan 21:25:41 01/02/02 (1)
- Re: Miramichi river salmon fishing season - Red Johnson 16:31:20 01/03/02 (0)
Hummingbird transducer - Marycatherine 19:39:17 01/02/02 (1)
- Re: Hummingbird transducer - Marycatherine 17:51:32 01/09/02 (0)
brooklure reels - Tim 18:06:38 12/29/01 (0)
Looking for feedback on my fishing web site... - Frank 20:40:31 12/27/01 (1)
- Re: Looking for feedback on my fishing web site... - madal 09:17:57 01/12/02 (0)
Permit in Placencia Belize - Mary 10:15:56 12/26/01 (0)
Livewell Parts (Liner) needed - Greg Meyer 08:36:01 12/25/01 (0)
Fishing in Canada - Bob Izumi 19:05:59 12/24/01 (0)
WTB: NATURAL IKE CRANKBAITS - Gary 19:53:02 12/23/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 17:38:45 12/23/01 (0)
Peace on Earth and Goodwill to Men - Russ Bassdozer 21:43:51 12/22/01 (0)
Mitchell 300 parts - john 10:59:51 12/22/01 (0)
Looking for some NATURAL IKE LURES - Mike 20:50:29 12/19/01 (1)
- Re: Looking for some NATURAL IKE LURES - Kevin 21:06:44 02/04/02 (0)
Mitchel reel repair parts - Ken 11:37:23 12/18/01 (0)
Lake Texoma Stripers - Monte 03:20:31 12/17/01 (0)
Part for Heddon 420 Dominator Saltwater Reel - Tom Burns 05:55:55 12/16/01 (0)
Placencia Belize Fishing - Dec. 15, 2001 - Jamal Mahdavian 16:30:59 12/15/01 (0)
ELTO Handitwin no spark - Bob 14:49:40 12/15/01 (4)
- Re: ELTO Handitwin no spark - Bob 16:42:29 12/15/01 (3)
  - Re: ELTO Handitwin no spark - Bob 18:27:49 12/15/01 (2)
    - Re: ELTO Handitwin no spark - Robert McBride 10:31:22 12/22/01 (0)
    - Re: ELTO Handitwin no spark - Scott Smith 06:17:16 12/16/01 (1)
antique johnson motor info needed - Jeff 13:15:37 12/15/01 (2)
- 1936 1.7 Hp Hohnson - Frankies Marine 11:44:39 01/01/02 (0)
- Re: antique johnson motor info needed - Tom Mundy 15:37:39 12/15/01 (0)
1964 Chrysler 55 hp need o-rings,seals & bearings - Lichen 06:28:38 12/14/01 (1)
- Re: 1964 Chrysler 55 hp need o-rings,seals & bearings - Tom Mundy 09:22:00 12/14/01 (0)
1964 Chrysler 55 hp need o-rings,seals & bearings - Lichen 06:28:08 12/14/01 (0)
How to convert 1955 johnson 5.5 to run with regular tank - Tolga Hatunoglu 13:44:04 12/12/01 (4)
- Re: How to convert 1955 johnson 5.5 to run with regular tank - Frankies Marine 11:49:39 01/01/02 (0)
- Re: How to convert 1955 johnson 5.5 to run with regular tank - Bob 18:31:12 12/15/01 (2)
  - Re: How to convert 1955 johnson 5.5 to run with regular tank - Robert McBride 10:35:37 12/22/01 (0)
  - Re: How to convert 1955 johnson 5.5 to run with regular tank - Tolga Hatunoglu 13:36:50 12/18/01 (1)
wanted: ZEBCO CARDINAL 3,4,6 or 7 reels in good condition - ray mcnamer 22:08:41 12/10/01 (0)
Tillotson Carb - Michael Morin 19:38:29 12/10/01 (0)
Key West Flatsfishing Report Dec - Capt. Larry 06:47:55 12/10/01 (0)
Monaghan Fishing Show - Bob Stahl 06:01:56 12/10/01 (0)
Evinrude Aquanaut - David 07:18:04 12/09/01 (1)
- Re: Evinrude Aquanaut - jeff eckert 11:44:24 03/20/02 (0)
Need help on 1984 15 hp Johnson seahorse - Leroy 19:16:45 12/08/01 (2)
- Re: Need help on 1984 15 hp Johnson seahorse - Major 12:07:23 12/09/01 (0)
- Re: Need help on 1984 15 hp Johnson seahorse - Major 11:58:57 12/09/01 (0)
What year is my Johnson? - Tim 16:11:19 12/08/01 (2)
- Re: What year is my Johnson? - Major 11:53:22 12/09/01 (0)
- Re: What year is my Johnson? - Leroy 09:01:41 12/09/01 (0)
Various parts for Mitchell 300 reals - Lawrence H. Eubanks 21:51:27 12/07/01 (1)
- Re: Various parts for Mitchell 300 reals - REELMEDIC 11:51:34 12/09/01 (0)
Placencia, Belize Fishing Report - Mary Toy 17:04:29 12/07/01 (0)
FISHING FAR AWAY: NICARAGUA - PHILIPPE 16:48:35 12/07/01 (0)
O & R Engines Aquabug Bumblebee Outboard - Jeff Arnold 16:17:43 12/07/01 (0)
chris with the 40 horse gail - tom gilham 12:55:33 12/06/01 (0)
spiegel brooklure 300 boat motor need parts - john 20:37:12 12/05/01 (0)
boat motor - john 20:20:20 12/05/01 (2)
- spiegel brooklure 300 - john 20:29:26 12/05/01 (0)
- spiegel brooklure 300 - john 20:29:06 12/05/01 (0)
1964 14.1 hp McCullough outboard - Carl Phillips 21:06:55 12/03/01 (0)
1964 14.1 hp McCullough outboard - Carl Phillips 21:06:32 12/03/01 (0)
Elgin 1959 5.5 Hp - Rob Young 15:24:29 12/03/01 (0)
Johnson 3.3 hp info - Ed 05:52:29 12/03/01 (2)
- Re: Johnson 3.3 hp info - major 22:31:18 12/07/01 (0)
- Re: Johnson 3.3 hp info - major 22:29:08 12/07/01 (1)
Shakespeare Wondereel - Brian Kearney 09:02:57 12/02/01 (1)
- Re: Shakespeare Wondereel - DICK JANAK 13:16:56 12/03/01 (0)
1955 Evinrude 15hp - Shelby Wilson 07:32:42 12/02/01 (0)
DEEP SEA FISHING TRADE - CAPTWALT 11:50:06 12/01/01 (0)
ted williams 7.5 hp. outboard - richard loyd 09:04:31 11/30/01 (3)
- Re: ted williams 7.5 hp. outboard - Rob Young 05:14:55 12/07/01 (0)
- Re: ted williams 7.5 hp. outboard - Rob Young 05:12:02 12/07/01 (0)
- Re: ted williams 7.5 hp. outboard - Tolga Hatunoglu 12:38:36 12/03/01 (0)
Mitchell 499 Spinning Reel - Peter 06:16:26 11/30/01 (1)
- Re: Mitchell 499 Spinning Reel - larry 21:21:09 04/19/02 (0)
Coleman Crawdad (Old style) - MiddleCrk 07:50:01 11/28/01 (1)
- Re: Coleman Crawdad (Old style) - hawkins 04:37:37 02/07/02 (0)
Old Auto Fly Reel - Kalamazoo - Neil Prien 18:51:51 11/26/01 (0)
wanted:1976 6 horse johnson - brian 22:06:13 11/25/01 (1)
- Re: wanted:1976 6 horse johnson - Frankies Marine 11:46:24 11/28/01 (0)
Mongomery Ward Sea King 6 H.P Recoil....HELP - Jim Griffith 18:50:18 11/25/01 (4)
- Re: Mongomery Ward Sea King 6 H.P Recoil....HELP - Jim Baker 15:13:52 01/01/02 (0)
- Re: Mongomery Ward Sea King - Ted Lidgett 19:32:40 12/21/01 (0)
- Re: Mongomery Ward Sea King 6 H.P Recoil....HELP - Shelby 07:36:07 12/02/01 (1)
- Re: Mongomery Ward Sea King 6 H.P Recoil....HELP - Tom Mundy 07:32:43 11/26/01 (0)
7.5 hp scott attwater - j.c.williamson 17:21:00 11/25/01 (1)
- Re: 7.5 hp scott attwater - Tom Mundy 07:30:12 11/26/01 (0)
converting - mike bleakley 15:25:51 11/25/01 (1)
- Re: converting - Chinewalker 09:18:24 11/26/01 (0)
Johnson service manual - tony rumpf 11:27:07 11/25/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 14:35:54 11/22/01 (0)
Anyone like fishing triva? - LandBigFish 17:28:44 11/21/01 (0)
please help my old Johnson ?? - Brian 20:16:57 11/20/01 (1)
- Re: please help my old Johnson ?? - Tom Mundy 07:10:34 11/22/01 (0)
Walleye wall paper for pc - Roger Mayer 07:54:47 11/20/01 (1)
- Re: Walleye wall paper for pc - dd 09:48:02 01/12/02 (0)
Outboard Losing Fuel Pressure - JZ 11:19:40 11/19/01 (2)
- Re: Outboard Losing Fuel Pressure - bobber 05:44:53 11/24/01 (1)
  - Re: Outboard Losing Fuel Pressure - JZ 16:28:37 11/26/01 (0)
Evinrude now slower, don't know why? - Lloyd 20:24:32 11/18/01 (2)
- Re: Evinrude now slower, don't know why? - Terry 21:29:13 11/23/01 (1)
  - Re: Evinrude now slower, don't know why? - ron 15:06:50 03/17/02 (0)
Wanted""""penn fishing reels - Dave 00:33:50 11/18/01 (2)
- Re: Wanted""""penn fishing reels - bill 20:44:03 03/05/02 (0)
- Re: Wanted""""penn fishing reels - bill 20:41:00 03/05/02 (0)
Wanted: Manual Pick-ups for Mitchell 302's - Michael Gebler 15:44:11 11/17/01 (1)
- Re: Wanted: Manual Pick-ups for Mitchell 302's - 'witz 11:56:33 01/15/02 (0)
Neptune Mighty Mite - Ron Goodwin 18:48:32 11/16/01 (2)
- Re: Neptune Mighty Mite - Pat Denning 19:19:09 11/18/01 (1)
  - Re: Neptune Mighty Mite - Carl Conner 03:09:25 03/20/02 (0)
merc.225 efi - al 20:06:48 11/15/01 (0)
OIL TO GAS RATIO FOR A 2HP MARINER O/B - JIM FAM 20:00:11 11/14/01 (1)
- Re: OIL TO GAS RATIO FOR A 2HP MARINER O/B - dave rhoton 13:45:12 11/29/01 (0)
link - Francois 23:31:31 11/13/01 (0)
Mitchell Garcia 300 and 300a Spools - Sully 21:36:32 11/13/01 (3)
- Re: Mitchell Garcia 300 and 300a Spools - 'witz 11:45:04 01/15/02 (0)
- Re: Mitchell Garcia 300 and 300a Spools - Michael Gebler 17:46:40 11/18/01 (0)
- Re: Mitchell Garcia 300 and 300a Spools - REELMEDIC 17:13:35 11/15/01 (1)
tanaka outboard motor. - Lee Page 08:46:11 11/10/01 (1)
- Re: tanaka outboard motor. - tolga hatunoglu 12:57:12 12/03/01 (0)
true temper fishing rods with built in reel - Ron Chapman 16:03:06 11/09/01 (2)
- Re: true temper fishing rods with built in reel - quentin passabet 20:09:24 03/17/02 (0)
- Re: true temper fishing rods with built in reel - DICK JANAK 12:37:04 11/28/01 (0)
aquabug bumblebee outboard - J. M. Arnold 15:54:51 11/09/01 (1)
- Re: aquabug bumblebee outboard - tolga hatunoglu 13:01:57 12/03/01 (0)
1974 OTASCO 5 HP MOTOR - MATT SAPPINGTON 14:11:11 11/07/01 (1)
- Re: 1974 OTASCO 5 HP MOTOR - Jason 11:11:12 03/25/02 (0)
Crazy People!!!! - Roger Mayer 12:33:26 11/07/01 (0)
Lake Ray Roberts, TX - Monte 02:28:32 11/07/01 (0)
Free Ringtones & Logos - Hotstuffs 01:13:01 11/06/01 (0)
MERCURY STARTER NEEDED - ED 19:42:05 11/05/01 (1)
- Re: MERCURY STARTER NEEDED - Frankies Marine 19:46:23 11/11/01 (0)
Fly Fishing Reel Sears Robuck and Company Model #535.31670 - Chris Myers 18:38:21 11/04/01 (0)
down riggers - BILL BRADSHAW 16:52:30 11/04/01 (1)
- Re: down riggers - brian 13:59:27 11/12/01 (0)
Johnson Outboard rebuilders & Parts - CAPTWALT 15:01:24 11/04/01 (1)
- Re: Johnson Outboard rebuilders & Parts - Tim Davis 17:14:16 02/07/02 (0)
Ryobi MGT4 - Rodney Thurman 15:33:45 11/03/01 (2)
- Re: Ryobi MGT4 - DICK JANAK 08:03:51 11/29/01 (1)
  - Re: Ryobi MGT4 - Rodney Thurman 11:12:34 03/16/02 (0)
1954 Evinrude 15hp - Mark Shipley 06:06:47 11/03/01 (2)
- Re: 1954 Evinrude 15hp - Frankie Howerton 19:53:14 11/11/01 (0)
- Re: 1954 Evinrude 15hp - ED 07:40:06 11/03/01 (0)
fiberglass row boat info needed - Jeff 19:30:15 10/30/01 (0)
Mitchell Garcia 510 Reel - Gasper 16:22:02 10/30/01 (2)
- Re: Mitchell Garcia 510 Reel - paul jarvis 21:48:52 04/23/02 (0)
- Re: Mitchell Garcia 510 Reel - Carpkiller 18:36:30 11/16/01 (1)
need elgin 7.5 parts - Alan 20:10:15 10/17/01 (2)
- Re: need elgin 7.5 parts - Brett 15:21:33 10/31/01 (0)
- Re: need elgin 7.5 parts - Tom Mundy 21:27:41 10/17/01 (0)
EVINRUDE 7.5 hp 1956 - Marcus 19:53:36 10/17/01 (1)
- Re: EVINRUDE 7.5 hp 1956 - boatman 05:42:40 11/06/01 (0)
EVINRUDE 7.5 hp 1956 - Marcus 19:41:10 10/17/01 (0)
SDFishin' is Giving away Windows XP ! - jeff 19:34:07 10/17/01 (0)
Martin outboard - Trevor Stafford 17:49:40 10/17/01 (1)
- Re: Martin outboard - Tom Mundy 18:33:07 10/17/01 (0)
GRUMMAN SAILBOAT INFO WANTED - Bill Narby 16:03:07 10/17/01 (0)
Do trout bite at swimmers? - dewey 20:41:57 10/15/01 (1)
- Re: Do trout bite at swimmers? - 'witz 11:48:05 01/15/02 (0)
Lonestar 13 Sailboat - J B Cleary 12:13:54 10/15/01 (0)
Lake Texoma Stripers - Monte 02:24:23 10/12/01 (0)
getting pump out of Elgin 7.5 - Alan H. 20:25:08 10/11/01 (0)
Mitchell 782 Parts - Dan 11:51:15 10/11/01 (0)
genie jon boat - Josh Cates` 09:28:59 10/11/01 (0)
Canadian Bass Championship tournament - Andrea 08:09:00 10/11/01 (0)
handle for mitchell 300 - Al Vibbert 20:51:38 10/10/01 (7)
- Re: handle for mitchell 300 - CAPTWALT 14:55:02 11/04/01 (0)
- Re: handle for mitchell 300 - REELMEDIC 14:23:16 10/14/01 (3)
  - Re: handle for mitchell 300 - REEL MEDIC 15:32:27 10/16/01 (0)
  - Re: handle for mitchell 300 - scott curtis 09:19:44 10/16/01 (1)
  - Re: handle for mitchell 300 - REELMEDIC 14:24:56 10/14/01 (0)
- Re: handle for mitchell 300 - REELMEDIC 13:57:32 10/14/01 (0)
- Re: handle for mitchell 300 - S. M. Porter,Jr. 09:04:13 10/14/01 (0)
Asian Forums and Chat Awaits You - Roger 19:06:08 10/10/01 (0)
Re: 86 Mariner Magnum 150 scored cylinder walls - boatman 05:47:07 10/10/01 (0)
86 Mariner Magnum 150 scored cylinder walls after rebuild - Ron Yonan 19:56:46 10/09/01 (0)
Mitchell 440A Reel - Sam 10:54:26 10/07/01 (3)
- Re: Mitchell 440A Reel - REELMEDIC 14:03:06 10/14/01 (0)
- Re: Mitchell 440A Reel - lou 10:16:56 10/08/01 (0)
- Re: Mitchell 440A Reel - kevin 09:59:16 10/08/01 (1)
Vintage Mini Paddles - Guy Brunet 22:45:12 10/06/01 (0)
Need 1978 15HP Gamefisher - c turner 19:41:44 10/05/01 (0)
Mitchell 4430 bail required - Mark Peterson 17:09:45 10/05/01 (1)
- Re: Mitchell 4430 bail required - jim g 20:14:49 10/05/01 (0)
Locating Fishing Lure/Spoon named Nungesser? - J Pace 09:47:28 10/05/01 (1)
- Re: Locating Fishing Lure/Spoon named Nungesser? - billy 05:47:45 11/08/01 (0)
mitchel 300 - Ronald Stewart 08:23:41 10/04/01 (3)
- Re: mitchel 300 - REELMEDIC 19:51:34 10/14/01 (0)
- Re: mitchel 300 - lou 10:19:13 10/08/01 (0)
- Re: mitchel 300 - jim g 20:16:18 10/05/01 (1)
catfish bait - jeff 22:29:48 10/03/01 (1)
- Re: catfish bait - jeff 22:31:26 10/03/01 (0)
Rings bad on 1979 55 hp Evinrude. - Land stuck 17:34:01 10/03/01 (1)
- Re: Rings bad on 1979 55 hp Evinrude. - Chinewalker 04:53:09 10/04/01 (0)
fishing job - Aaron L Klinger 10:38:25 10/03/01 (2)
- Re: fishing job - Eric Knutson call collect 402 4354118 21:22:10 10/11/01 (0)
- Re: fishing job - Eric Knutson call collect 402 4354118 21:18:15 10/11/01 (1)
TARPON FISHING TOURNAMENT NICARAGUA - Philippe Tisseaux 17:14:37 10/02/01 (0)
1948 Johnson TD-20 5HP outboard technical info? - Joe Sienkiewicz 15:04:49 10/02/01 (0)
MERCRUISER 215H - BRYAN 21:51:07 09/30/01 (0)
'70 Sea King 20HP - Chris Lamb 19:24:42 09/30/01 (1)
- Re: '70 Sea King 20HP - FRED MILLER 13:03:17 10/06/01 (0)
Elgin 7.5 oil - Alan H. 18:12:07 09/30/01 (1)
- Re: Elgin 7.5 oil - Brett 15:25:49 10/31/01 (0)
Apache (Clinton) Outboard Motor Question. - Sean P. Collins 22:44:39 09/29/01 (0)
1987 88hp loses spark when throttled up-help - Rick V. 17:41:41 09/29/01 (1)
- Re: 1987 88hp loses spark when throttled up-help - Mike 20:53:18 10/02/01 (0)
need a diagram of 6hp mercury 1968 outboard lower unit - Roy paider 09:12:47 09/29/01 (0)
boat parts - judy pohyar 15:51:59 09/28/01 (0)
Take an Extravagent Fishing Trip EACH Year - Tom Ford 15:42:33 09/28/01 (0)
Elgin 7.5 - Alan H. 20:44:36 09/27/01 (0)
fishing trip invite - steve hawkins 15:55:21 09/27/01 (0)
Fishing Report - Ray Roberts, Fairfield, Richland Chambers, TX - Monte 14:05:50 09/27/01 (0)
1961 "speedqueen" 14' fiberglass boat with a 35 h.p. westbend motor. - timothy conway sr. 22:47:58 09/26/01 (1)
- Re: 1961 "speedqueen" 14' fiberglass boat with a 35 h.p. westbend motor. - Jack Underwood 13:26:36 03/27/02 (0)
head for 65 ducktwin evanrude 3-1/2 hp outboard motor - robert allen 21:51:05 09/26/01 (1)
- Re: head for 65 ducktwin evanrude 3-1/2 hp outboard motor - earl sims 13:50:14 01/02/02 (0)
Seaking carb parts - john maddox 11:09:19 09/26/01 (0)
trailer wireing - bruce fowler 06:16:30 09/26/01 (0)
Trailer Wireing - Bruce 20:04:18 09/25/01 (1)
- Re: Trailer Wireing - ron 15:14:55 03/17/02 (0)
Tell tale squirt - Dennis 19:57:57 09/24/01 (1)
- Re: Tell tale squirt - boatman 05:45:38 09/27/01 (0)
11ft. coleman crawdad boat info. - Jeff 19:14:18 09/24/01 (2)
- Re: 11ft. coleman crawdad boat info. - de 20:25:41 09/29/01 (1)
  - Re: 11ft. coleman crawdad boat info. - jim 14:30:34 02/27/02 (0)
sears elgin 7.5 outboard motor. - vince 14:33:44 09/24/01 (1)
- Re: sears elgin 7.5 outboard motor. - TDHoward 11:18:09 09/25/01 (0)
1983 Sears elgin 7.5 outboard motor - vince 14:24:12 09/24/01 (0)
Minkota Mag18? - Kevin.. 18:15:17 09/23/01 (0)
oil mixture - Dennis Matchell 21:04:43 09/22/01 (1)
- Re: oil mixture - boatman 05:41:36 09/27/01 (0)
What year is it? - Dennis Matchell 20:42:48 09/22/01 (1)
- Re: What year is it? - Tom Mundy 21:02:51 09/22/01 (0)
Garcia Mithchell 306 rells - John Dunnagan 09:50:30 09/22/01 (1)
- Re: Garcia Mithchell 306 rells - lou 10:21:02 10/08/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 14:37:05 09/21/01 (0)
plastic worms - Jessie 13:20:21 09/21/01 (1)
- Re: plastic worms - Kevin 21:12:16 02/04/02 (0)
help with sea king 80 - lost in st george 01:51:43 09/21/01 (0)
help with sea king 80 - lost in st george 01:51:40 09/21/01 (0)
help with sea king 80 - lost in st george 01:51:01 09/21/01 (0)
REPAIR MANUAL 7.5 EVINRUDE 1956 - Marcus 15:07:10 09/20/01 (0)
garcia 230 spinning reel handle - ron swanson 05:17:31 09/20/01 (0)
Eska outboard lower end noise - Dave Wilson 22:21:47 09/19/01 (0)
Sea King 15hp, what year? - Jim Watson 09:38:41 09/19/01 (1)
- Re: Sea King 15hp, what year? - Tom Mundy 18:25:50 09/19/01 (0)
Fishing lure with name that sounds like "Nun-Getz-It - J Pace 14:20:26 09/18/01 (0)
WANTED. Tiller Throttle for 60 HP Johnson - CAPTWALT 12:52:27 09/18/01 (0)
RFA wants mandatory circle hook law - Jack Schweiker 15:25:15 09/17/01 (0)
TOA, Taoma Outboard Association - John 03:35:20 09/15/01 (1)
- Re: TOA, Taoma Outboard Association - LeeRoy 21:15:45 09/15/01 (0)
need starter bracket 18/20/25hp evinrude - tbarr 03:58:10 09/14/01 (1)
- Re: need starter bracket 18/20/25hp evinrude - earl sims 13:46:50 01/02/02 (0)
atlantic salmon fishing miramichi - BYRON COUGHLAN 21:04:52 09/13/01 (0)
atlantic counts on the miramichi river the best in years - Ken vickers 20:21:58 09/13/01 (0)
1961 JOHNSON 40HP PLEASE HELP - Mike Johnston 20:10:55 09/13/01 (1)
- Re: 1961 JOHNSON 40HP PLEASE HELP - mike 15:52:53 09/28/01 (0)
Evinrude Lighttwin - Roger L'Hommedieu 16:52:27 09/13/01 (2)
- Re: Evinrude Lighttwin - Frankies Marine 17:20:17 09/15/01 (0)
- Re: Evinrude Lighttwin - Tom Mundy 18:17:19 09/13/01 (0)
NEED MECURY MARK 10 PARTS - Charles Seiler 17:53:33 09/11/01 (0)
alcedo micron reel - Nick 19:10:05 09/10/01 (0)
Oasis du Gouin - Michel 05:44:32 09/10/01 (0)
lonestar boat cover - Vickie Thomas 12:40:45 09/09/01 (0)
1977 115 hp evinrude outboard - ken mitchell 09:45:30 09/09/01 (1)
- Re: 1977 115 hp evinrude outboard - Terry 15:16:21 09/09/01 (0)
1946 2.5 hp elgin gas & oil mix. - Frank 09:35:40 09/09/01 (0)
Montgomery Ward 2 cyl. small outboard - John de Marrais 09:11:20 09/09/01 (1)
- Re: Montgomery Ward 2 cyl. small outboard - Tom Mundy 10:31:01 09/09/01 (0)
Searching For: - Mike R 19:32:52 09/08/01 (0)
Sea King 35hp - Tom 14:53:07 09/08/01 (1)
- Re: Sea King 35hp - JOE 19:26:24 11/28/01 (0)
Help On Newer 7.5 Elgin - Mike R 05:37:55 09/08/01 (1)
- Re: Help On Newer 7.5 Elgin - TDHoward 07:59:31 09/10/01 (0)
Transducer for Humminbird TCR 101 - Peter 22:23:52 09/07/01 (0)
Ontario Salmon and Steelhead - Norm 14:31:43 09/07/01 (1)
- Re: Ontario Salmon and Steelhead - steve robie 10:53:11 09/28/01 (0)
LIVE BAIT WANTED - Giorgio 07:42:47 09/07/01 (0)
RECOIL SPRING FOR JOHNSON TD-20 - SKIP 17:34:52 09/06/01 (1)
- Re: RECOIL SPRING FOR JOHNSON TD-20 - Frankies Marine 17:25:56 09/15/01 (0)
1957 Mercury Mark 10 - Carl Phillips 11:58:51 09/06/01 (1)
- Re: 1957 Mercury Mark 10 - LeeRoy 19:26:07 09/16/01 (0)
1958 Gale 35hp - Carl Phillips 11:53:57 09/06/01 (0)
Elgin 2.5HP info, parts needed and what year it is - Frank 20:12:31 09/05/01 (1)
- Re: Elgin 2.5HP info, parts needed and what year it is - Tom Mundy 21:47:44 09/05/01 (0)
lower unit 9.9 marnier needed - keith tanton 16:21:49 09/05/01 (1)
- Re: lower unit 9.9 marnier needed - Frankies Marine 17:29:45 09/15/01 (0)
Need a coil for a 4 hp Chrysler Sea King - Tim 11:01:12 09/05/01 (1)
- Re: Need a coil for a 4 hp Chrysler Sea King - Frankies Marine 17:32:10 09/15/01 (0)
Chemong Lake fishing - Rick 18:03:20 09/04/01 (1)
- Re: Chemong Lake fishing - Don 08:02:37 03/05/02 (0)
Outboard won't start after jumping another boater - Mike [USMC Active] 17:07:02 09/04/01 (2)
- Re: Outboard won't start after jumping another boater - your beat 16:01:35 10/17/01 (0)
- Re: Outboard won't start after jumping another boater - Jim G 13:11:07 09/06/01 (1)
Handel for Mitcheel Garica 300 - Bob bressman 14:04:26 09/04/01 (4)
- Re: diagram for Mitcheel Garica 300 - fred 13:43:40 09/10/01 (3)
  - Re: diagram for Mitchell spinning reel 300 - Loafer409 22:44:04 02/07/02 (0)
  - Re: diagram for Mitcheel Garica 300 - 'witz 11:51:04 01/15/02 (0)
  - Re: diagram for Mitchell spinning reel 300 - fred 20:31:12 09/10/01 (1)
Bayliner, 1988 Capacity - Paul Grant 12:26:10 09/04/01 (3)
- Re: Bayliner, 1988 Capacity - dae 13:31:35 09/12/01 (2)
  - 1991 Bayliner 19 feet 5000cc 200ho 350hours - FOB yen800,000.- in Japan 15:44:34 03/10/02 (1)
    - Re: 1991 Bayliner 19 feet 5000cc 200ho 350hours - 1 15:45:52 03/10/02 (0)
Vibration of throttle control/1950 Johnson 5 hp. TN-26 - Matt 21:06:54 09/03/01 (0)
9.6 hp seaking motor - J. Hutcheson 20:02:55 09/03/01 (1)
- Re: 9.6 hp seaking motor - william kovach 17:04:21 03/10/02 (0)
help Pistins and Rings - Randy 14:58:29 09/03/01 (1)
- Re: help Pistins and Rings - bobber 12:48:48 09/04/01 (0)
Eagle Magna 2 - side scan pac MODEL NUMBER NEEDED. - Larry 12:27:38 09/03/01 (0)
1986 Evinrude 40 hp - Mike T 08:02:28 09/03/01 (0)
Smokercraft 2000 17' Millentia transom problem - Paul Schmidt 14:34:01 09/02/01 (0)
175 merc blackmax - Russell Chambers 21:12:59 08/31/01 (1)
- Re: 175 merc blackmax - Frankies Marine 17:40:15 09/15/01 (0)
Big bucktail jigs - Dave Pugh 07:12:50 08/31/01 (0)
Envirude Computer ,175 hp year 1999 - Juan Medina 07:02:02 08/30/01 (0)
Envirude Computer ,175 hp year 1999 - Juan Medina 07:00:02 08/30/01 (0)
1970 4 hp evinrude revs up - joe 06:52:20 08/30/01 (2)
- Re: 1970 4 hp evinrude revs up - rob cole 11:50:17 12/03/01 (0)
- Re: 1970 4 hp evinrude revs up - rob cole 11:46:50 12/03/01 (0)
Envirude 115 used starter wanted - JC Ortiz 22:33:04 08/29/01 (1)
- Re: Envirude 115 used starter wanted - earl sims 13:35:28 01/02/02 (0)
Re: 1984 15 hp gamefisher (Eska ) OIL AND WATER LEAK - Al Scott 22:23:13 08/27/01 (1)
- Re: 1984 15 hp gamefisher (Eska ) OIL AND WATER LEAK - tom Mundy 07:39:58 08/28/01 (0)
catfish tip - Jacob Jowett 21:06:42 08/27/01 (1)
- Re: catfish tip - Bobby Lewis 16:03:41 10/02/01 (0)
need coil for 5 HP Scott Attwater - Ron Hooper 16:21:07 08/27/01 (0)
1969 7HP Chrysler Outboard - Jeff Gorney 13:29:37 08/27/01 (1)
- Re: 1969 7HP Chrysler Outboard - Al 17:00:44 08/31/01 (0)
Chrysler Outboard #55hp - Norman Craven 15:31:56 08/26/01 (1)
- Re: Chrysler Outboard #55hp - Al 17:00:07 08/31/01 (0)
Evinrude Lightwin 4hp 42065-E02234 - Larry Leiter 07:19:45 08/26/01 (1)
- Re: Evinrude Lightwin 4hp 42065-E02234 - Tom Mundy 07:33:23 08/26/01 (0)
Sears Gamefisher 9.9 part - Jim 13:09:56 08/25/01 (0)
Crysler 20 - Richard 20:23:38 08/24/01 (1)
- Re: Crysler 20 - Tom Mundy 07:21:03 08/25/01 (0)
Chrysler 5hp outboard - Bruno Tardat 23:07:30 08/23/01 (1)
- Re: Chrysler 5hp outboard - Al 16:56:55 08/31/01 (0)
Wards Sea King 6 hp Chrysler motor - Lichen 19:38:30 08/23/01 (0)
DEEP SEA FISHING SWAP - CAPTWALT 16:36:47 08/23/01 (0)
1957 Montgomery Ward wood boat - Mark Briggs 15:02:59 08/23/01 (1)
- Re: 1957 Montgomery Ward wood boat - corm 15:18:44 08/25/01 (0)
carb adjustment on 6HP wards Sea King - need info - Kim Blackwell 20:21:54 08/22/01 (1)
- Re: carb adjustment on 6HP wards Sea King - need info - corm 15:10:43 08/25/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 18:50:25 08/22/01 (0)
1970 4 hp carb rebuilt update - joe 14:24:54 08/22/01 (1)
- Re: 1970 4 hp carb rebuilt update - corm 15:21:03 08/25/01 (0)
25 yamaha four stroke - kevin 06:28:45 08/22/01 (0)
evinrude 4 hp carb rebuilt ? - Joe 06:02:00 08/22/01 (0)
Dreaded Suzuki - Jim G 20:48:32 08/21/01 (0)
Kautzky's Lazy Ike's appetite origional catfish bait - Tina 13:13:06 08/21/01 (0)
Fuel to motor with primer pump - Mike 13:09:29 08/21/01 (2)
- Re: Fuel to motor with primer pump - Chinewalker 07:53:32 08/24/01 (0)
- Re: Fuel to motor with primer pump - Jim G 20:26:58 08/21/01 (0)
Re: lower unit - Ron 03:34:15 08/21/01 (0)
lower unit - debbie 20:09:57 08/20/01 (3)
- Re: lower unit - Chinewalker 07:44:06 08/21/01 (0)
- Re: lower unit - Ron 03:22:41 08/21/01 (1)
  - Re: lower unit contact me if you haven;t got it fixed. - wm. edester 11:48:54 09/07/01 (0)
9.9 Evenrude outboard spark plug gap ? - Fergus 14:30:50 08/20/01 (2)
- Re: 9.9 Evenrude outboard spark plug gap ? - Kevin 20:31:54 08/30/01 (0)
- Re: 9.9 Evenrude outboard spark plug gap ? - ron 03:38:38 08/21/01 (0)
Pflueger M-30 trolling motor - Tom Miller 12:05:43 08/20/01 (1)
- Re: Pflueger M-30 trolling motor - corm 14:59:16 08/25/01 (0)
1984 --115 johnson oil leak - Weldon 21:25:58 08/19/01 (1)
- Re: 1984 --115 johnson oil leak - joe 23:22:43 08/20/01 (0)
troubles with 6hp. evinerude - Phil 07:40:27 08/19/01 (1)
- Re: troubles with 6hp. evinerude - Chinewalker 08:19:28 08/20/01 (0)
Shimano Strdic spincast reel parts diagram????? - Scott Parker 19:55:17 08/18/01 (0)
top cyl. pumping water (Need Advice) - Mike Harper 12:35:07 08/18/01 (0)
tilt and trim problem on Evinrude - Ron 20:52:59 08/17/01 (1)
- Re: tilt and trim problem on Evinrude - Jim T 02:29:31 12/16/01 (0)
55 horsepower wards sea king motor - Ray 18:34:08 08/17/01 (4)
- Re: 55 horsepower wards sea king motor - Henry Lauders 16:43:44 03/27/02 (0)
- Re: 55 horsepower wards sea king motor - Henry Lauders 16:40:32 03/27/02 (0)
- Re: 55 horsepower wards sea king motor - Gray Kinney 17:38:57 10/18/01 (0)
- Re: 55 horsepower wards sea king motor - corm 15:05:29 08/25/01 (0)
alcedo micron reel - Nick 17:50:17 08/17/01 (0)
Tilt/trim 1974 Evinrude 70 - Peter 15:37:59 08/17/01 (1)
- Re: Tilt/trim 1974 Evinrude 70 - Ron 03:16:59 08/21/01 (0)
9.9 Mercury - pat haefner 05:38:33 08/17/01 (2)
- 9.9 Mercury - CAPTWALT 11:16:55 08/17/01 (0)
- 9.9 Mercury - CAPTWALT 11:16:40 08/17/01 (0)
Abu Garcia Pro Max Reels - Jamie Ferdarko 21:58:51 08/16/01 (0)
repair parts for a Mitchell spinning reel - James Jarriault 17:03:39 08/16/01 (4)
- Re: repair parts for a Mitchell spinning reel - REELMEDIC 19:59:42 10/14/01 (0)
- Re: repair parts for a Mitchell spinning reel - bob 22:21:31 10/09/01 (0)
- Re: repair parts for a Mitchell spinning reel - lou 10:23:31 10/08/01 (0)
- Re: repair parts for a Mitchell spinning reel - victor 20:29:32 08/24/01 (1)
308 parts repair diagram???? - bob 13:22:06 08/16/01 (0)
prop shaft shim - Ron 12:44:13 08/16/01 (0)
Need info on Pickwick - Travis Sherman 11:34:10 08/16/01 (0)
fishing worm that really works - Hagueman 23:00:25 08/15/01 (0)
evinrude lightwin 42065S E0006060 - Chad 19:16:17 08/15/01 (0)
Evinrude 4 hp info needed - Joe M 16:22:05 08/15/01 (3)
- Re: Evinrude 4 hp info needed - Tom Mundy 21:33:18 08/15/01 (2)
  - Re: Evinrude 4 hp info needed - Chinewalker 08:04:02 08/16/01 (0)
  - Re: Evinrude 4 hp info needed - Joe 06:26:40 08/16/01 (1)
Wards sea king info needed. - Joe M 16:19:12 08/15/01 (0)
Johnson 115 and Tachometer hook up - Mark 11:31:39 08/15/01 (1)
- Re: Johnson 115 and Tachometer hook up - Ron 03:47:06 08/21/01 (0)
1961 Mercury 500 cooling question - Ron 19:59:44 08/14/01 (1)
- Re: 1961 Mercury 500 cooling question - Chinewalker 10:41:30 08/15/01 (0)
Mitchell 300 reel bail spring positioning - bobby jones 19:35:53 08/14/01 (0)
Evinrude actin' rude - Ben Sherr 19:33:46 08/14/01 (2)
- Re: Evinrude actin' rude - joe 23:36:53 08/15/01 (0)
- Re: Evinrude actin' rude - Chinewalker 10:43:09 08/15/01 (0)
lower housing - Mercury "Mark 5" - s.e.w 19:27:15 08/14/01 (1)
- Re: lower housing - Mercury "Mark 5" - dave 21:21:57 08/15/01 (0)
Re: 1959 Duracraft Waterbug - jeffrey D 07:46:56 08/14/01 (0)
catfish in blewitt falls - joe 21:48:21 08/13/01 (0)
johnson 7.5hp - george g 18:11:31 08/13/01 (1)
- Re: johnson 7.5hp - Ralph 22:56:09 03/30/02 (0)
fuel mixture - Joe 13:31:31 08/13/01 (1)
- Re: fuel mixture - ron 03:50:32 08/21/01 (0)
Merc 25 problem - Kevin 18:43:15 08/12/01 (2)
- Re: Merc 25 problem - Kevin 18:46:49 08/12/01 (1)
  - Re: Merc 25 problem - mr j 22:25:13 10/06/01 (0)
sea king boat - steve 14:31:11 08/12/01 (0)
4 hp Sea King coil test? - Tim 09:35:27 08/12/01 (1)
- Re: 4 hp Sea King coil test? - clint brantham 19:44:09 08/14/01 (0)
MOTORGUIDE BRAVE ELECTRIC TROLLING MOTOR - UPTHERIVERWITHOUTAPADDLE 14:30:38 08/11/01 (0)
humminbird 3d paramount depthfinder - tj 11:29:36 08/10/01 (2)
- Re: humminbird 3d paramount depthfinder - Moooooo 23:45:27 08/11/01 (0)
- Re: humminbird 3d paramount depthfinder - shaalan 23:24:03 08/11/01 (0)
Saganaga Lake - kevin 11:21:28 08/10/01 (0)
Amc outboard 1951 - steven 10:13:41 08/10/01 (3)
- Re: Amc outboard 1951 model number - Tom Mundy 10:09:18 08/11/01 (0)
- Re: Amc outboard 1951 model number - steven 07:34:39 08/11/01 (1)
- Re: Amc outboard 1951 - Tom Mundy 23:03:51 08/10/01 (2)
Rapala Fat Rap Shallow Runner 5cm - Andrew Quek 20:46:06 08/09/01 (0)
Rapala Fat Rap Shallow Runner 5cm - Andrew Quek 20:46:01 08/09/01 (0)
Rapala Fat Rap Shallow Runner 5cm - Andrew Quek 20:44:36 08/09/01 (0)
lower unit - tom 19:42:22 08/09/01 (4)
- Re: lower unit - Mark Shipley 05:52:11 11/03/01 (0)
- Re: lower unit - Chinewalker 10:06:36 08/13/01 (0)
- Re: lower unit - tom 21:26:38 08/09/01 (1)
- Re: lower unit - boatman 20:52:18 08/09/01 (2)
HELP!!!!!!! - Joseph J. McCusker 20:32:38 08/08/01 (0)
Evinrude 7.5 1956 Water Pump - MARCUS 16:25:07 08/08/01 (0)
Hoodsport - Eric Tallman 16:58:52 08/07/01 (0)
Carb for 1969 Evinrude - Charlton Cain 14:35:56 08/07/01 (0)
1974 Evinrude 135HP Tilt/Trim Motor/Pump - Rich Redolphy 11:37:54 08/07/01 (0)
Need Propeller for Sears - Ted Williams elec. fishing motor - Jim Day 07:38:31 08/07/01 (0)
Year of the Johnson 10 horse I just bought. - Paul W. Maikranz 13:31:14 08/06/01 (2)
- Re: Year of the Johnson 10 horse I just bought. - Tom Mundy 18:46:28 08/06/01 (1)
  - Re: Year of the Johnson 10 horse I just bought. - Chinewalker 10:28:05 08/07/01 (0)
Year of the Johnson 10 horse I just bought. - Paul W. Maikranz 12:15:25 08/06/01 (0)
squaw fish - hunter 19:09:38 08/05/01 (0)
squaw fish - hunter 19:09:32 08/05/01 (0)
1992 evinrude 48hp power problem - Curt 07:47:39 08/05/01 (2)
- Re: 1992 evinrude 48hp power problem - Curt 19:43:22 08/30/01 (0)
- Re: 1992 evinrude 48hp power problem - joe 20:11:29 08/19/01 (0)
Evinrude troubles - Brad McElroy 21:50:04 08/04/01 (4)
- Re: Evinrude troubles - Pat Haefner 21:09:04 08/06/01 (0)
- Re: Evinrude troubles - Fly Dog 16:14:53 08/06/01 (1)
  - Re: Evinrude troubles - jim g 20:32:38 08/21/01 (0)
- Re: Evinrude troubles - Tom Mundy 08:19:23 08/05/01 (0)
1973 Montgomery Wards Sea King 14' fibreglass w/ 25 hp motor - Y. Moore 18:43:05 08/04/01 (1)
- Re: 1973 Montgomery Wards Sea King 14' fibreglass w/ 25 hp motor - Scott B. 21:41:50 08/15/01 (0)
3.6 hp firestone outboard - j-mar 16:33:28 08/04/01 (0)
Info on Gale Sea King - Kerry 11:10:40 08/04/01 (2)
- Re: Info on Gale Sea King - Kerry 18:14:31 08/04/01 (0)
- Re: Info on Gale Sea King - Carl Phillips 17:35:29 08/04/01 (0)
Sea King Outboard or Westbend Outboard - Steve Schroeder 18:36:06 08/03/01 (0)
Sears Boat Motor Question - Kyle 07:23:57 08/03/01 (0)
How do I rig a telescoping crappie pole? - Mike 20:29:39 08/01/01 (0)
1976 15' Stryker Bass Boat - Tony Ulery 14:28:23 08/01/01 (0)
Sea King 12hp 1954-55 - isaac 13:34:13 08/01/01 (0)
Can mine look like this? - George 13:48:52 07/31/01 (0)
sears 5.5 Ted Williams outboard - Chris 01:22:55 07/31/01 (5)
- Re: sears 5.5 Ted Williams outboard - shannon 07:47:50 04/11/02 (0)
- Re: sears 5.5 Ted Williams outboard - bobby 03:48:48 07/31/01 (3)
  - Re: sears 5.5 Ted Williams outboard - Jeff 15:19:39 04/10/02 (0)
  - Re: sears 5.5 Ted Williams outboard - max smith 11:14:14 08/11/01 (0)
  - Re: sears 5.5 Ted Williams outboard - max smith 10:40:58 08/11/01 (2)
5 hp montgomery ward motor need information - Jay laurence 22:37:49 07/30/01 (1)
- Re: 5 hp montgomery ward motor need information - David 07:43:00 04/01/02 (0)
Gamefisher Parts - Waterboy 21:37:51 07/30/01 (1)
- Re: Gamefisher Parts - JZ 10:31:41 09/25/01 (0)
westbend 50hp waterpump - jeff shurack 14:15:12 07/30/01 (3)
- Re: westbend 50hp waterpump - joe 20:19:54 08/19/01 (0)
- Re: westbend 50hp waterpump - jeff 14:16:57 07/30/01 (1)
  - Re: westbend 50hp waterpump - jeff 14:19:01 07/30/01 (0)
Force 9.9 2stroke outboard overheating - simon 09:39:08 07/30/01 (1)
- Re: Force 9.9 2stroke outboard overheating - TDHoward 14:16:55 07/31/01 (0)
1983 Evinrude 200 hp ourboard - Nick Bianco 09:34:07 07/30/01 (0)
ward 15hp seaking/plastic gear/help - Rick Hunter 20:32:43 07/29/01 (2)
- Re: ward 15hp seaking/plastic gear/help - Scott Travis 11:42:47 09/15/01 (0)
- Re: ward 15hp seaking/plastic gear/help - Scott Travis 11:41:35 09/15/01 (0)
cowling - John Clark 16:44:54 07/29/01 (1)
- Re: cowling - John Clark 16:46:29 07/29/01 (0)
Mercury no reverse - S. Wilcox 12:04:58 07/29/01 (0)
Mounting transducer on pontoon? - Chris Pasquinelly 21:08:41 07/28/01 (1)
- Re: Mounting transducer on pontoon? - Ken 14:41:06 07/31/01 (0)
Reitement property - Richard Kohlstrom 13:45:29 07/28/01 (1)
- Re: Reitement property - Richard Kohlstrom 13:47:04 07/28/01 (0)
Lake front home or cabin - Richard Kohlstrom 13:42:24 07/28/01 (0)
Lake front home or cabin - Richard Kohlstrom 13:41:05 07/28/01 (0)
Lake front home or cabin - Richard Kohlstrom 13:39:07 07/28/01 (0)
6.hp evinrude - Phil 12:34:04 07/28/01 (3)
- Re: 6.hp evinrude - Phil 15:24:36 08/01/01 (0)
- Re: 6.hp evinrude - Greg 12:31:36 07/31/01 (1)
- Re: 6.hp evinrude - Frank 20:00:38 07/28/01 (0)
Sears Ted Williams air cooled 7&1/2hp outboard motor - James Gregory 12:30:14 07/28/01 (3)
- Re: Sears Ted Williams air cooled 7&1/2hp outboard motor - al 18:32:42 09/13/01 (0)
- Re: Sears Ted Williams air cooled 7&1/2hp outboard motor - Phil 19:08:13 08/01/01 (0)
- Re: Sears Ted Williams air cooled 7&1/2hp outboard motor - Rudy Martin 09:02:40 07/30/01 (2)
West Bend 5 1/2 HP Impeller Source? - Norm 09:41:15 07/28/01 (1)
- Re: West Bend 5 1/2 HP Impeller Source? - joe 20:24:09 08/19/01 (0)
VIAGRA FOR A DEPRESSIVE PERSON'S CARP FISHING! - TERRY CROWE 18:27:35 07/27/01 (2)
- Re: VIAGRA FOR A DEPRESSIVE PERSON'S CARP FISHING! - hey 20:03:23 07/28/01 (1)
  - Re: VIAGRA FOR A DEPRESSIVE PERSON'S CARP FISHING! - Don 08:12:27 03/05/02 (0)
40hp johnson seahorse - pete 15:41:16 07/27/01 (1)
- Re: 40hp johnson seahorse - Lindsey Lariviere 13:49:31 08/06/01 (0)
1955 hp johnson - lee 13:04:34 07/27/01 (1)
- Re: 1955 hp johnson - Tom Bumgardner 16:57:14 01/07/02 (0)
penn green reel ( spinning) - Nick Fergusson 10:10:19 07/27/01 (1)
- Re: penn green reel ( spinning) - Frank 19:57:27 07/28/01 (0)
gas oil ratio for 1961 75 hp Johnson motor - Kristal 09:42:46 07/27/01 (1)
- Re: gas oil ratio for 1961 75 hp Johnson motor - Terry 18:22:07 07/27/01 (0)
Mercury 19?? 6 hp twin - J DENTON 07:35:27 07/27/01 (2)
- Re: Mercury 19?? 6 hp twin - Bob 11:22:21 08/02/01 (0)
- Re: Mercury 19?? 6 hp twin - Tom Mundy 21:06:13 07/27/01 (0)
Can't find bare used heads for 1978 Evinrude 115 - Frank 19:52:34 07/26/01 (2)
- Addition - Frank 19:54:55 07/26/01 (1)
  - Re: Addition - Terry 18:26:00 07/27/01 (0)
Calcutta bamboo poles - Gary Coe 19:34:41 07/26/01 (0)
evinrude moter - dave 20:01:14 07/25/01 (1)
- Re: evinrude moter - Tom Mundy 20:43:25 07/25/01 (0)
Power trim assembly - Vern 14:26:21 07/25/01 (1)
- Re: Power trim assembly - Ron 03:58:37 08/21/01 (0)
help! - chris 18:52:32 07/24/01 (1)
- Re: help! - Tom Mundy 21:27:56 07/24/01 (0)
Need 9.9 up to 15 horse short shaft outboard motor - Darold Reiner 16:54:26 07/24/01 (1)
- Re: Need 9.9 up to 15 horse short shaft outboard motor - brian 20:22:06 07/26/01 (0)
fishing - thomas barnett 16:50:01 07/24/01 (0)
Eska outboard parts, older model - Mario M. 13:51:30 07/24/01 (5)
- Re: Eska outboard parts, older model - Buck Hunter 15:59:46 08/27/01 (0)
- i have a 7 hp eska for parts - harold 20:10:16 08/10/01 (0)
- have 7 hp eska - harold 20:04:32 08/10/01 (0)
- eska outboards - charlie brown 17:03:00 08/09/01 (0)
- Re: Eska outboard parts, older model - Tom Mundy 21:24:25 07/24/01 (0)
Eska outboard parts, older model - Mario M. 13:51:05 07/24/01 (0)
needed info help trolling motor prop - joe mccleary 10:21:12 07/24/01 (0)
Garcia Mitchell 307 - Rick 22:40:17 07/23/01 (3)
- Re: Garcia Mitchell 307 - bob 20:15:55 08/14/01 (2)
  - Re: Garcia Mitchell 307 - nat 06:58:26 08/20/01 (1)
    - Re: Garcia Mitchell 307 - lou 13:01:44 09/21/01 (0)
Penn International 6 - Albert T. Kocurek 10:05:16 07/23/01 (2)
- Re: Penn International 6 - Morroman 22:14:04 09/04/01 (0)
- Re: Penn International 6 - Morroman 22:13:40 09/04/01 (0)
1966 6hp johnson - Chris 14:53:51 07/22/01 (1)
- Re: 1966 6hp johnson - Ron 04:05:26 08/21/01 (0)
7h Martin 60 - Ralph Merideth 16:08:10 07/21/01 (1)
- Re: 7h Martin 60 - Tom Mundy 17:20:49 07/21/01 (0)
EAGLE MAGNA II FISHFINDER - JEFF GRAY 09:13:45 07/21/01 (0)
prop for seaking 7.5 hp - ed coatesa 08:29:30 07/21/01 (1)
- Re: prop for seaking 7.5 hp - Tom Mundy 17:17:48 07/21/01 (0)
1973--105hp Chrysler "Pumping water and Steam ?????" - Mike 18:41:51 07/20/01 (0)
1973--105hp Chrysler "Pumping water and Steam ?????" - Mike 18:41:27 07/20/01 (1)
- Re: 1973--105hp Chrysler "Pumping water and Steam ?????" - Frank 19:59:51 07/26/01 (0)
1959 Duracraft Waterbug - jeff 14:53:13 07/20/01 (1)
- Re: 1959 Duracraft Waterbug - Nate the Arkie 21:08:56 07/25/01 (0)
'71 60HP ENGINE CRANKS, NO SPARK, NO START - KRAIG WITH NON STARTING EVER RUDE 09:24:13 07/20/01 (0)
Re: SeaKing 14' Aluminum boat... - Byron 22:40:18 07/19/01 (0)
johnson sea horse td-20 - skip 16:30:47 07/19/01 (1)
- Re: johnson sea horse td-20 - Tom Mundy 17:23:26 07/19/01 (0)
1968 4 HP Ted Williams outboard oil mix - Dale McElheny 04:32:27 07/19/01 (0)
Elgin info needed - Tommy Hicks 18:12:27 07/18/01 (1)
- Re: Elgin info needed - Paul 12:30:16 08/06/01 (0)
reble rambler trolling motor 100 - joe mccleary 16:08:58 07/18/01 (0)
DEEP SEA Fishing SWAP - CAPTWALT 06:03:02 07/18/01 (0)
Kingfisher baitcaster reel repair do-it-yourself. - Wesley 20:12:29 07/17/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 15:24:36 07/17/01 (0)
Old Sears hand operated trolling motor - Dan 11:15:10 07/17/01 (0)
1956 EVINRUDE 7.5 - marcus 09:39:50 07/17/01 (4)
- Re: 1956 EVINRUDE 7.5 - marcus 10:09:49 07/19/01 (0)
- Re: 1956 EVINRUDE 7.5 - Chinewalker 20:12:49 07/18/01 (1)
- Re: 1956 EVINRUDE 7.5 - marcus 11:15:04 07/18/01 (2)
- Re: 1956 EVINRUDE 7.5 - Jim G 20:57:12 07/17/01 (3)
Lower unit for 1977 Mercury 500 - 50 hp needed - Matt 08:26:19 07/17/01 (1)
- ie: where can I go to find one ? - Matt 08:28:50 07/17/01 (0)
Evinrude Model number and year? - Jim Meddaugh 08:06:15 07/17/01 (0)
Evinrude Model number and year? - Jim Meddaugh 08:06:03 07/17/01 (0)
good year sea bee model#025-3569, please help - Shawn Barganier 20:42:25 07/16/01 (0)
1973 105 hp "Chrysler" Water pump question? - The Wart 20:27:34 07/16/01 (1)
- Re: 1973 105 hp "Chrysler" Water pump question? - Terry 10:14:28 07/17/01 (0)
info on johnson motor - Skip 17:04:54 07/16/01 (1)
- Re: info on johnson motor - boatman 21:31:50 07/16/01 (0)
225 Evinrude - TBOY 16:55:27 07/16/01 (1)
- Re: 225 Evinrude - Wayne 08:06:45 07/19/01 (0)
225 evinrude - TBOY 16:50:10 07/16/01 (3)
- Re: 225 evinrude - TBOY 16:50:51 07/16/01 (2)
  - Re: 225 evinrude - tboy 16:53:41 07/16/01 (0)
  - Re: 225 evinrude - tboy 16:53:25 07/16/01 (0)
225 Evinrude - TBOY 16:48:57 07/16/01 (0)
1972 Wards(CLINTON) 7 HP outboard motor - Dave D. 14:53:14 07/16/01 (0)
19?? Johnson 3 HP Sea Horse - Joe Denton 06:07:33 07/16/01 (2)
- Re: 19?? Johnson 3 HP Sea Horse - skip 16:09:45 07/17/01 (0)
- Re: 19?? Johnson 3 HP Sea Horse - Tom Mundy 08:45:01 07/16/01 (0)
looking for strike king diamond shad - Ed Sass 15:41:57 07/15/01 (0)
Free Fishing Tours! - Tim England 15:14:05 07/15/01 (0)
Fishing gear wanted - Alan Dwan 07:19:53 07/15/01 (1)
- Re: Fishing gear wanted - Alan 07:22:40 07/15/01 (0)
40`s Vintage Johnston 5.5 SeaHorse - Michael Dubery 00:30:43 07/15/01 (1)
- Re: 40`s Vintage Johnston 5.5 SeaHorse - Tom Mundy 12:20:14 07/15/01 (0)
1979 model 90 mercury - Tyrone Neel 17:10:04 07/14/01 (0)
sea king 5 hp water pump - skip 15:28:59 07/14/01 (0)
j c penny outboard motor - james wegmann 19:27:18 07/12/01 (0)
j c penny outboard motor - james wegmann 19:20:13 07/12/01 (2)
- Re: j c penny outboard motor - jams wegmann 19:23:00 07/12/01 (1)
  - Re: j c penny outboard motor - dennis champeau 12:31:40 08/07/01 (0)
Question on Johnson 6 hp outboard - flywheel - tkeen 18:12:21 07/12/01 (2)
- Re: Question on Johnson 6 hp outboard - flywheel - Tom Mundy 20:21:59 07/12/01 (1)
  - Re: Question on Johnson 6 hp outboard - flywheel - Chinewalker 07:50:08 07/13/01 (0)
1984 15 hp gamefisher (Eska ) OIL AND WATER LEAK - Al Scott 04:11:43 07/12/01 (1)
- Re: 1984 15 hp gamefisher (Eska ) OIL AND WATER LEAK - Kevin Carlson 18:56:40 07/22/01 (0)
60 horse evinrude electromatic - Freaky_1 22:36:03 07/11/01 (1)
- Re: 60 horse evinrude electromatic - Freaky_1 23:14:55 07/11/01 (0)
Johnson 6hp flywheel question - TomK 21:16:06 07/11/01 (1)
- Re: Johnson 6hp flywheel question - Tom Mundy 15:19:10 07/12/01 (0)
Mitchell 300 rell - Bob Plotts 21:54:47 07/10/01 (0)
1961 10 HP Johnson Lower Unit Install-Help - Norm 14:33:07 07/10/01 (0)
Antique Outbords - Brad Anderson 10:30:31 07/10/01 (1)
- Re: Antique Outbords - Tom 17:48:54 07/10/01 (0)
New site for fishing in Ireland - Alan Dwan 05:58:52 07/10/01 (0)
LOWER UNIT MERC - Boatman 05:34:25 07/10/01 (0)
power trim - keith fiechtner 22:00:46 07/09/01 (0)
Looking for Andy Reeker trolling spoons - Retired Fish 17:58:09 07/09/01 (0)
Mitchell 782 reel - Dave 17:05:51 07/09/01 (1)
- Re: Mitchell 782 reel - Dan 11:45:32 10/11/01 (0)
fuel mixture for 5hp chrysler - Janice Marr 13:46:14 07/09/01 (5)
- Re: fuel mixture for 5hp chrysler - Janice 19:33:47 07/10/01 (0)
- Re: fuel mixture for 5hp chrysler - Terry 08:08:39 07/10/01 (1)
- Re: fuel mixture for 5hp chrysler - Janice 04:47:12 07/10/01 (2)
- Re: fuel mixture for 5hp chrysler - Janice 04:47:07 07/10/01 (0)
- Re: fuel mixture for 5hp chrysler - Terry 19:49:14 07/09/01 (4)
OLD FISHING TACKLE - Steve 21:28:15 07/08/01 (1)
- Re: OLD FISHING TACKLE - Tim 17:52:45 12/29/01 (0)
1965 Sea King 50Hp Parts - Ken 19:49:24 07/08/01 (0)
crysler sea king - Gary W. Hogan 17:44:39 07/08/01 (1)
- Re: crysler sea king - Anthony 06:03:54 07/09/01 (0)
uslan 501 spinning reel - roy sanders 10:55:04 07/08/01 (0)
Re: Ted Williams 7.0 & Eska Questions - Mark 10:44:44 07/08/01 (0)
Ted Williams 7.0 & Eska Questions - Jim VanNoy 21:56:47 07/07/01 (0)
Old 1 HP ? Sea King - Dave 14:32:13 07/07/01 (0)
Mercury Serial Number trace - Jim Donahue 13:58:56 07/07/01 (0)
NO SPARK ON 1983 70 HP 3-CYL JOHNSON - Rick 00:38:27 07/07/01 (1)
- Re: NO SPARK ON 1983 70 HP 3-CYL JOHNSON - Mark 10:38:54 07/08/01 (0)
fishing Lake Marion, South Carolina - Russ Bonham 23:55:57 07/06/01 (0)
Eska Questions - Jim VanNoy 21:16:41 07/06/01 (0)
REALLY need to find a recipe for Catfish Bait ! - Kyle Evans 18:18:44 07/05/01 (0)
looking for eska parts - Kevin 15:42:12 07/05/01 (2)
- Re: looking for eska parts - Bobby 18:20:22 07/06/01 (0)
- Re: looking for eska parts - Tom Mundy 21:03:07 07/05/01 (0)
30HP Johnson Electric Start to Pull start - Randy 15:27:38 07/05/01 (1)
- Re: 30HP Johnson Electric Start to Pull start - jimshad 22:08:35 07/06/01 (0)
30HP Johnson Electric Start to Pull start - Randy 15:27:07 07/05/01 (0)
Wanted info & parts for Sea King (Montomery Wards)6HP - Herb 12:57:21 07/05/01 (0)
Ted Williams Outboard Motor - Lee Holifield 11:54:33 07/05/01 (4)
- Re: Ted Williams Outboard Motor - Nasty Nick 21:05:16 10/08/01 (0)
- Re: Ted Williams Outboard Motor - george 23:56:59 09/17/01 (0)
- Re: Ted Williams Outboard Motor - BOB 09:55:39 09/06/01 (0)
- Re: Ted Williams Outboard Motor - Bob 09:46:23 09/06/01 (0)
Mitchell Model 314 - John Hritz 11:52:20 07/05/01 (0)
1986 85hp evinrude wiring diagram - noel 22:13:46 07/04/01 (0)
1985 Evinrude 115hp - Espree 16:34:14 07/04/01 (0)
S/N 15012-42235 Evinrude - L J 16:21:12 07/04/01 (3)
- What's the ---- 42235 ? - L J 17:10:20 07/05/01 (1)
  - Re: What's the ---- 42235 ? - Chinewalker 09:11:19 07/06/01 (0)
- Please see post about 12 down the page... (15012 model) - Chinewalker 12:03:37 07/05/01 (0)
quantum E7-4 spinning reel - Le Roy Papke 12:26:39 07/04/01 (1)
- Re: quantum E7-4 spinning reel - lakehopper 13:54:36 07/07/01 (0)
mariner 50hp - POUCHUCQ 05:46:36 07/04/01 (0)
sea king motors - greg 23:44:03 07/03/01 (8)
- Re: sea king motors - Steve Schroeder 18:31:39 08/03/01 (0)
- Re: sea king motors - Russell Benning 13:59:24 07/05/01 (0)
- Re: sea king motors - Carlos Villegas 23:22:44 07/04/01 (5)
  - Re: sea king motors - john muha 04:15:26 04/15/02 (0)
  - Re: sea king motors - bernie goulet 19:14:31 10/04/01 (1)
  - Re: sea king motors - MIKE TOLER 21:08:04 07/30/01 (0)
  - Re: sea king motors - Steve Crawford 17:47:22 07/29/01 (0)
  - Re: sea king motors - Steve Crawford 17:45:30 07/29/01 (0)
Water pump installation - Danny 17:06:27 07/03/01 (1)
- Re: Water pump installation (7.5 Ted Williams) - Danny 17:08:00 07/03/01 (0)
Fuel Mixture on Sears Ted illiams 5.0hp outboard motor - Jeff McDonald 16:23:44 07/03/01 (0)
schematic 9.9HP Sears Gamefisher - Justin 14:36:19 07/03/01 (1)
- Re: schematic 9.9HP Sears Gamefisher - Jim 11:43:17 08/25/01 (0)
Spark plug fouling up - Lee Johnson 07:42:34 07/03/01 (0)
evinrude mod 15012-42713 - Jerry Lawler 20:35:00 07/02/01 (1)
- Re: evinrude mod 15012-42713 - Chinewalker 11:47:30 07/03/01 (0)
Gamefisher 9.9 fuel oil mixture? - scotty 17:59:24 07/02/01 (0)
Motor controls - Lamar 16:02:17 07/02/01 (0)
9 hp viking outboard - k grant 15:45:57 07/02/01 (0)
75 evinrude lower unit diagram - lance adams 14:06:08 07/02/01 (0)
Wards Sea King 10 HP - Thom Aubin 15:46:24 07/01/01 (1)
- Re: Wards Sea King 10 HP - Steve Crawford 17:52:58 07/29/01 (0)
I have a 7.5 Ted Williams sears outboard - Joe 12:48:04 07/01/01 (2)
- Re: I have a 7.5 Ted Williams sears outboard - Lee Holifield 11:58:24 07/07/01 (0)
- Re: I have a 7.5 Ted Williams sears outboard - Lee Holifield 11:53:36 07/07/01 (0)
Flywheel Puller - Norm Ruddock 12:14:11 07/01/01 (0)
Looking for old Merc parts. - Wayne Canino 07:23:46 07/01/01 (0)
McCulloch 45hp fuel/carb parts - Darren Fuoco 00:21:42 07/01/01 (0)
SeaKing 14' Aluminum boat... - Jason 21:38:06 06/29/01 (1)
- Re: SeaKing 14' Aluminum boat... - Byron 22:35:44 07/19/01 (0)
FISH PIRATES IN KAUAI - Tom Lasher 14:58:48 06/29/01 (0)
Ward's Sea King boat - Rhoades 10:45:19 06/29/01 (2)
- Re: Ward's Sea King boat - Jselenke 13:57:49 07/30/01 (0)
- Re: Ward's Sea King boat - Jimshadd 22:11:09 07/06/01 (1)
5 hp. sea king - Greg Gaudard 06:14:14 06/29/01 (1)
- Re: 5 hp. sea king - David White 09:49:16 07/01/01 (0)
sea king boat motor - Greg Gaudard 19:29:51 06/28/01 (0)
Merc controls - Ben 06:54:54 06/28/01 (0)
Wards Sea King drive shaft part - Linda Nelson 21:57:34 06/27/01 (0)
need an electric starter for an '87 classic 50 mercury putboard - TJ 21:08:44 06/27/01 (1)
- Re: need an electric starter for an '87 classic 50 mercury putboard - TJ 08:14:50 06/29/01 (0)
1964 Johnson 40hp Lower Unit trouble - Chris Carvelli 14:42:38 06/27/01 (1)
- Re: 1964 Johnson 40hp Lower Unit trouble - Bruce 15:30:28 06/27/01 (0)
Need information on lubricating a gear case on a Sea King - Roger Handy 13:48:27 06/27/01 (1)
- Re: Need information on lubricating a gear case on a Sea King - Roger H. 13:49:17 06/27/01 (0)
Evinrude Sportwin 9.5 HP - Bruc Cummings 13:12:45 06/27/01 (2)
- Re: Evinrude Sportwin 9.5 HP - bill 19:28:41 02/17/02 (0)
- Re: Evinrude Sportwin 9.5 HP - E. Shea 18:14:56 06/28/01 (1)
chrysler magnapower 2 ignition - Dave papic 06:59:10 06/27/01 (0)
1986 60 hp Evinrude crank shaft - C.S.Patterson 23:52:30 06/26/01 (0)
abs plastic repair - g.jeffers 16:33:00 06/26/01 (0)
3 hp johnson - Craig Mann 13:52:15 06/26/01 (1)
- Re: 3 hp johnson - Chinewalker 19:41:38 06/26/01 (0)
reel handle - Al Barnett 20:27:30 06/25/01 (0)
Sears 7.5hp air cooled points gap/electronic swap? - Harold 12:07:07 06/25/01 (1)
- Re: Sears 7.5hp air cooled points gap/electronic swap? - TDHoward 07:22:02 06/29/01 (0)
Honda Boat motor - Jim Myers 06:47:22 06/25/01 (1)
- Re: Honda Boat motor - mark 10:50:20 07/08/01 (0)
Rod & Reel - Rick 02:33:42 06/25/01 (0)
15hp montgonery ward? - Bob Mosher 18:57:09 06/24/01 (2)
- Re: 15hp montgonery ward? - Anthony 05:55:48 06/25/01 (1)
  - Re: 15hp montgonery ward? - Ed 18:47:55 08/03/01 (0)
Free to fish - Duane 12:18:31 06/24/01 (3)
- Re: Free to fish - bruce 16:26:55 06/26/01 (1)
- Re: Free to fish - kevin 12:25:04 06/25/01 (2)
  - Re: Free to fish - Duane 20:19:14 06/26/01 (0)
Wards SeaKing 7 Hp motor - Dale Lanning 07:32:21 06/24/01 (2)
- Re: Wards SeaKing 7 Hp motor - Dale Lanning 06:36:35 06/27/01 (0)
- Re: Wards SeaKing 7 Hp motor - Anthony 06:06:19 06/25/01 (1)
9.6 hp Sea King 50's or 60's - need info - Gary Al;len 20:48:26 06/23/01 (0)
Johnson seahorse 35hp - Joe Heinrich 17:46:16 06/23/01 (2)
- Re: Johnson seahorse 35hp - Tom Mundy 20:38:59 06/23/01 (1)
  - Re: Johnson seahorse 35hp - Joe 12:49:28 06/24/01 (0)
rip shad lure - john 12:06:08 06/23/01 (0)
Chryysler Outboard Parts - Ed Abercrombie 20:25:13 06/22/01 (0)
in need of a crank on a early mitchell 300a series reel - Jeremy 16:35:16 06/22/01 (0)
in need of a crank on a early mitchell 300a series reel - Jeremy 16:33:42 06/22/01 (0)
prop for an Elgin - Paul 13:07:26 06/22/01 (0)
Johnson 40hp - shifting - Noel 12:05:13 06/22/01 (1)
- Re: Johnson 40hp - shifting - ron 15:34:00 03/17/02 (0)
45 HP WEST BEND / GOLDEN EAGLE OUTBOARD - jim boisvere 21:00:17 06/21/01 (0)
Need fisherman - Patrick McCarthy 13:49:00 06/21/01 (1)
- Re: Need fisherman - Patrick 13:49:34 06/21/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 17:30:00 06/20/01 (0)
1957 Scott Atwater - Thomas Villcheck 20:55:17 06/19/01 (0)
Mitchell 302 Brake Diagram - Al Holt 16:58:37 06/19/01 (1)
- Re: Mitchell 302 Brake Diagram - 'witz 12:07:14 01/15/02 (0)
PVC pole fishing - John 16:05:24 06/19/01 (0)
5hp pennys powerloop engine - Steve 23:55:01 06/18/01 (0)
Garcia Mitchell 300 Part Required - Andy Melnyk 22:37:30 06/18/01 (1)
- Re: Garcia Mitchell 300 Part Required - REELMEDIC 20:04:39 10/14/01 (0)
CLINTON J9 and J5 - Brian Rhoades 22:29:59 06/18/01 (0)
25 h.p. johnson overheat alarm - jerry sitko 19:21:30 06/18/01 (1)
- Re: 25 h.p. johnson overheat alarm - jerry sitko 19:29:59 06/18/01 (0)
west bend golden eagle 45 hp outboard - jim boisvere 17:58:40 06/18/01 (1)
- Re: west bend golden eagle 45 hp outboard - Anthony 19:01:27 06/19/01 (0)
sea king 25 hp**need parts - Gene McKasson 14:02:42 06/18/01 (4)
- Re: sea king 25 hp**need parts - joe 17:57:56 06/20/01 (3)
  - Re: sea king 25 hp**need parts - Gene McKasson 09:40:25 06/21/01 (2)
    - Re: sea king 25 hp**need parts - Jason 19:11:10 10/01/01 (0)
    - Re: sea king 25 hp**need parts - tom Cabelus 07:32:31 07/14/01 (1)
Ray Jefferson Fish Locator - Dick 10:42:05 06/18/01 (0)
Evenrude 9 1/2 H.P. Sportwin - John Owen 06:50:07 06/18/01 (0)
Grady White Fishing Boats - Earl Padfield 17:49:24 06/17/01 (1)
- Re: Grady White Fishing Boats - allan 19:54:33 06/17/01 (0)
carp - Steve 22:35:15 06/16/01 (1)
- Re: carp - boatman 21:28:56 06/20/01 (0)
Lower unit (1975 85HP Evenrude) - Brian 21:16:25 06/16/01 (1)
- Re: Lower unit (1975 85HP Evenrude) - Frankies Marine 19:07:45 06/17/01 (0)
FUEL TANK????? - David Zimmerman 09:06:23 06/16/01 (1)
- Re: FUEL TANK????? - paul 12:46:29 08/06/01 (0)
RYOBI AD6000 Reel - Janie Manasco 18:03:23 06/15/01 (0)
left side tank cover - Weldon 17:43:56 06/15/01 (0)
Royal 3 HP by Atlas Supply - Dean Purdon 12:43:25 06/15/01 (3)
- Re: Royal 3 HP by Atlas Supply - Dean Purdon 12:45:27 06/15/01 (2)
  - Re: Royal 3 HP by Atlas Supply - Anthony 11:00:01 06/16/01 (0)
  - Re: Royal 3 HP by Atlas Supply - Chinewalker 14:51:45 06/15/01 (0)
Wards 7.5 HP Sea King Info Please - Nick Shimp 12:07:01 06/15/01 (1)
- Re: Wards 7.5 HP Sea King Info Please - Fisherman 12:07:43 06/20/01 (0)
Link - Angie 11:34:14 06/15/01 (0)
johnson fuel mixture - year - Paul Maurer 07:32:12 06/15/01 (3)
- Re: johnson fuel mixture - year - Paul 09:33:40 06/15/01 (1)
- Re: johnson fuel mixture - year - Chinewalker 07:37:28 06/15/01 (2)
  - Re: johnson fuel mixture - year - Chinewalker 14:46:22 06/15/01 (0)
Wards 7hp Outboard; Clinton Engine - Paul Kennedy 22:24:47 06/13/01 (1)
- Re: Wards 7hp Outboard; Clinton Engine - Fisherman 12:09:14 06/20/01 (0)
Montgomery Ward 3.0 Hp. - David 18:38:20 06/13/01 (3)
- Re: Montgomery Ward 3.0 Hp. - Gene McKasson 16:45:50 06/19/01 (1)
  - Re: Montgomery Ward 3.0 Hp. - Gene McKasson 16:47:48 06/19/01 (0)
- Re: Montgomery Ward 3.0 Hp. - Anthony 05:24:31 06/14/01 (0)
How do I make a drop shot rig ? - Al 18:22:25 06/13/01 (2)
- Re: How do I make a drop shot rig ? - ksinkc 05:48:32 06/15/01 (1)
  - Re: How do I make a drop shot rig ? - Al 17:56:10 06/22/01 (0)
Fathers Day Fishing Special at Phillips Lakes,Sweeny,Texas - Richard Vanbeber 18:06:41 06/13/01 (0)
FREE GEAR GIVEAWAY - Fishing Tips Daily Staff 13:50:19 06/13/01 (1)
- Re: FREE GEAR GIVEAWAY - John J. Smarge 09:43:37 06/21/01 (0)
BEST CATFISH BAIT.... - Cletus 12:10:09 06/13/01 (0)
5hp johnson seahorse - LEE ROGALLA 22:11:06 06/12/01 (1)
- Re: 5hp johnson seahorse - Tom Mundy 11:31:45 06/13/01 (0)
Been gulf fishing - Weldon 21:20:37 06/12/01 (0)
Clinton Engine Corp Model J9 1101 C - Bob Haberkorn 20:03:38 06/12/01 (1)
- Re: Clinton Engine Corp Model J9 1101 C - Tom Mundy 21:39:39 06/12/01 (0)
Cozumel Sailfishing - Scott Webster 17:04:05 06/12/01 (0)
Wards sea king mod#vwb52110/sn57x20659 impeller - doug 16:54:59 06/12/01 (0)
plug gap for 3.5 sea king - jeff king 10:34:19 06/12/01 (1)
- Re: plug gap for 3.5 sea king - Anthony 09:10:39 06/13/01 (0)
Sea King 5hp Outboard - Info Requested - Rick R 22:10:38 06/11/01 (0)
Outdoors Banner Exchange... - Chris 21:49:01 06/11/01 (0)
Champion H10J Spark Plug - Brad James 01:23:35 06/11/01 (2)
- Re: Champion H10J Spark Plug - Dan 06:36:47 06/11/01 (1)
  - Re: Champion H10J Spark Plug - Paul 12:51:45 08/06/01 (0)
Vintage Reel Parts Sources - Mark M 15:28:12 06/09/01 (0)
Need wiring diagram for Chrysler 45 outboard 1972 - Reece 05:06:56 06/09/01 (1)
- Re: Need wiring diagram for Chrysler 45 outboard 1972 - Anthony 06:10:04 06/09/01 (0)
Sea King Aluminum Information??? - Lori Meyer 11:14:11 06/08/01 (3)
- Re: Sea King Aluminum Information??? - jimshad 09:19:08 06/12/01 (2)
  - Thanks Jim... possible to change motors? - Lori Meyer 10:58:39 06/12/01 (1)
    - Re: Thanks Jim... possible to change motors? - jim shadd 14:48:20 06/18/01 (0)
63 Lone Star Cabin Cruse Liner II - Kurt LeBoeuf 20:52:56 06/06/01 (0)
Underwater Camera Plans - Joe 20:06:04 06/06/01 (3)
- Re: Underwater Camera Plans - SJH 22:30:15 07/25/01 (0)
- Re: Underwater Camera Plans - SJH 22:29:10 07/25/01 (0)
- Re: Underwater Camera Plans - SH 22:25:26 07/25/01 (0)
Wards 7 HP Sea King - Jim 18:44:05 06/06/01 (2)
- Re: Wards 7 HP Sea King - Fisherman 12:14:07 06/20/01 (0)
- Re: Wards 7 HP Sea King - Paul Kennedy 20:36:32 06/13/01 (1)
mercury mark 25. need lower unit - mike tallent 15:09:20 06/05/01 (0)
mercury mark 25e - mike tallent 09:04:44 06/05/01 (0)
Free! - Hot Bass Fishing Tips Every Week - Clem Luchow 02:33:43 06/05/01 (0)
Merc Classic 50 - Bill 15:51:50 06/04/01 (1)
- Re: Merc Classic 50 - GWA 22:15:54 06/04/01 (0)
9HP SeaKing - Andy 07:19:49 06/04/01 (0)
Orlando wilson show theme song? - katharine 06:34:56 06/04/01 (1)
- Re: Orlando wilson show theme song? - TDHoward 11:28:38 06/04/01 (0)
help to produce & market new tackle ideas - Roland Mata 22:29:58 06/03/01 (0)
Shakespeare Trolling Motor Sigma 30 - Kris 11:33:24 06/03/01 (0)
Ward Sea King 15hp model 52215 - Fred 08:19:23 06/03/01 (0)
69 evinrude fuel problems - Mike 07:36:45 06/03/01 (1)
- Re: 69 evinrude fuel problems - Mark 10:54:45 07/08/01 (0)
Evinrude Jet impeller - Terry H 16:37:58 06/02/01 (2)
- Re: Evinrude Jet impeller - Steve G 23:22:04 06/18/01 (0)
- Re: Evinrude Jet impeller - Mark Mulanax 15:17:44 06/09/01 (1)
Johnson 75hp wiring diagram - Doug 13:43:29 06/02/01 (1)
- Re: Johnson 75hp wiring diagram - GTT 15:50:56 08/08/01 (0)
Sea King outboard motor Model GG18732A - Shirley Morris 06:26:31 06/02/01 (0)
Johnson Sea Horse TD 20 - Greg Schuh 19:34:35 06/01/01 (0)
Gas tank - 1955 - Dennis 18:28:51 06/01/01 (1)
- Re: Gas tank - 1955 - Tom Mundy 21:18:26 06/01/01 (0)
Water pump impeller for Elgin - Frank 18:26:31 06/01/01 (1)
- Re: Water pump impeller for Elgin - Mark Southard 05:46:42 07/15/01 (0)
Martin Outboard Motor - Al Klebek 16:14:37 06/01/01 (3)
- Re: Martin Outboard Motor - mike 21:54:28 03/08/02 (0)
- Re: Martin Outboard Motor - trent nichols 18:32:51 09/20/01 (0)
- Re: Martin Outboard Motor - Mmotor Master 17:05:45 09/16/01 (0)
wiring diagram 1974 Evin Rude 40 hp - Gail Ward 10:10:17 06/01/01 (0)
3 H.P. Brooklure Outboard Motors by Spiegel - Chester Jahns 07:49:58 06/01/01 (0)
Cover for 15 HP montgomery ward sea king - Rado Popp 16:04:10 05/31/01 (0)
electromatic shift - dave 12:33:25 05/31/01 (1)
- Re: electromatic shift - jim G 19:56:18 05/31/01 (0)
1955 Johnson carb settings - Mark Paoletti 10:07:25 05/31/01 (0)
AquaBug Bike Bug Bicycle Engine Motor - Mike Schneider 09:57:06 05/31/01 (5)
- Re: AquaBug Bike Bug Bicycle Engine Motor - DAVE LARSEN 07:00:05 09/09/01 (0)
- Re: AquaBug Bike Bug Bicycle Engine Motor - Bob Muthler 15:40:42 07/28/01 (1)
  - Re: AquaBug Bike Bug Bicycle Engine Motor - DAVE LARSEN 07:04:37 09/09/01 (0)
- Re: AquaBug Bike Bug Bicycle Engine Motor - Bob Muthler 15:39:22 07/28/01 (0)
- Re: AquaBug Bike Bug Bicycle Engine Motor - Joe Rigsby 13:20:17 06/24/01 (0)
Sears Gamefisher 15 HP - JZ 13:50:10 05/30/01 (4)
- Re: Sears Gamefisher 15 HP - NEIL 12:15:53 06/04/01 (3)
  - Re: Sears Gamefisher 15 HP - c turner 20:31:22 10/04/01 (0)
  - Re: Sears Gamefisher 15 HP - Dean 14:38:30 06/29/01 (0)
  - Re: Sears Gamefisher 15 HP - Fisherman 12:17:17 06/20/01 (2)
M. W. Sea King Boat and Motor - Kevin 11:58:43 05/30/01 (0)
Montgomery Ward Sea King Boat and Motor - Kevin 11:51:53 05/30/01 (0)
Fishing regs - Kirk 10:41:39 05/30/01 (0)
Evinrude Sportwin Model 9822 9.5hp - jay ray 09:53:14 05/30/01 (1)
- Re: Evinrude Sportwin Model 9822 9.5hp - B.R. 14:35:28 05/30/01 (0)
Mitchell ultra light Tradition 100% Graphite - Daniel 07:07:33 05/30/01 (1)
- Re: Mitchell ultra light Tradition 100% Graphite - Daniel 07:08:25 05/30/01 (0)
Sears Waterwitch info wanted - Ray 21:28:31 05/29/01 (0)
Fishing Club - Mickey C 20:11:01 05/29/01 (0)
15HP. SEA KING - STEVE 18:12:14 05/29/01 (3)
- Re: 15HP. SEA KING - brew-man 17:54:14 05/31/01 (0)
- Re: 15HP. SEA KING - Anthony 06:03:43 05/30/01 (0)
- Re: 15HP. SEA KING - Bobber 18:25:04 05/29/01 (0)
Free Music Instrument Mail Order Catalog - Musician's Friend 11:56:45 05/29/01 (0)
How Old Is My Elgin Motor - Frank 16:29:07 05/28/01 (0)
NOVICE FLY FISHER NEEDS HELP - Brent Elsass 13:30:11 05/28/01 (1)
- Re: NOVICE FLY FISHER NEEDS HELP - Bob 23:30:30 03/23/02 (0)
Anthony--I need a part - Rich 12:42:46 05/28/01 (1)
- Re: Anthony--I need a part - Anthony 08:21:10 05/29/01 (0)
Hey Bob!--Wards 9.6 h.p. outboard model and serial # - Rich Butts 12:07:11 05/28/01 (0)
69 evinrude loss of power under load - Mike 09:07:49 05/28/01 (2)
- Re: 69 evinrude loss of power under load - DICK 10:48:52 06/18/01 (0)
- Re: 69 evinrude loss of power under load - randal 20:54:40 05/28/01 (0)
69 evinrude loss of power under load - Mike 09:06:17 05/28/01 (0)
CARP DOUGH S AND SCENTS - TERRY CROWE 21:00:28 05/27/01 (0)
CARP DOUGH S AND SCENTS - TERRY CROWE 21:00:04 05/27/01 (1)
- Re: CARP DOUGH S AND SCENTS - Jim G 09:56:39 05/31/01 (0)
YOU can appear on a TV Fishing Show - Capt. Ray Kelly 20:37:04 05/27/01 (0)
New bassin' resource for San Angelo and West Texas - HAWGUS MAXIMUS 16:38:43 05/27/01 (0)
Ward's 7.5 hood - Kirk 16:02:35 05/27/01 (0)
Garcia/Mitchell402 bail wire and bail arm - Robert Hoare 14:27:29 05/27/01 (0)
Sea King 5 hp - Vince 12:11:26 05/27/01 (0)
Ward's 7.5 hood - Kirk 17:52:49 05/26/01 (0)
Johnson 75hp model V4AL13 S/N 2200265 - Michael 14:42:47 05/26/01 (0)
7 HP Seaking - Mike M 14:18:27 05/26/01 (2)
- Re: 7 HP Seaking - Dave D. 14:30:45 07/16/01 (0)
- Re: 7 HP Seaking - Dave D. 14:24:07 07/16/01 (0)
You need old parts? - Jim G 23:11:58 05/25/01 (0)
Catching catfish - Don 08:42:33 05/24/01 (1)
- Re: Catching catfish - anonymous 21:21:56 06/15/01 (0)
Sparrow Lake Pike Derby Sat June 09 2001 - mike 02:04:50 05/24/01 (0)
Fishing Job - Armando De Albornoz 21:52:25 05/23/01 (0)
johnson 18hp prop - Tyler Otto 14:04:44 05/23/01 (2)
- Re: johnson 18hp prop - Dave E 16:43:00 05/23/01 (0)
- Re: johnson 18hp prop - Dave E 16:42:33 05/23/01 (0)
Spark plug needed - Bill Unke 12:43:24 05/23/01 (0)
TOP WATER LURE - V. BARBIER 09:03:40 05/23/01 (0)
Sea King 5HP - Kris Bryant 20:52:20 05/22/01 (6)
- Need Help with Sea King 5HP - Jason 05:21:21 10/02/01 (0)
- Re: Sea King 5HP - Randy Vice 20:37:24 09/05/01 (0)
- Re: Sea King 5HP - Randy Vice 20:34:50 09/05/01 (1)
- Re: Sea King 5HP - jason 06:09:22 06/24/01 (0)
- Re: Sea King 5HP - jason 06:08:54 06/24/01 (0)
- Re: Sea King 5HP - Bob 06:32:46 05/23/01 (5)
mithchell/garcia 303 - chuck kelly 17:20:17 05/22/01 (1)
- Re: mithchell/garcia 303 - kevin 08:04:07 05/25/01 (0)
Kona Hawaii fishing report - Capt. Jeff Rogers 15:59:48 05/22/01 (0)
1964 70 H.P. Evinrude - Bill 12:43:54 05/22/01 (1)
- Re: 1964 70 H.P. Evinrude - Keith 11:14:40 09/23/01 (0)
Wards Seaking Paint - Bob 13:03:30 05/21/01 (1)
- Re: Wards Seaking Paint - Nikki 19:12:46 06/08/01 (0)
i need a prop for a 7.5 sears ted williams motor - shawn morgan 12:25:24 05/21/01 (0)
i need a prop for a 7.5 sears ted williams motor - shawn morgan 12:24:56 05/21/01 (1)
- Re: i need a prop for a 7.5 sears ted williams motor - Jeff 10:02:42 07/09/01 (0)
Lake Ray Roberts, TX Fishing Report - Monte 01:10:45 05/21/01 (0)
Need Help Removing Rotor On 80 HP Mercury - David 15:54:11 05/19/01 (2)
- Re: Need Help Removing Rotor On 80 HP Mercury - william edester 10:52:39 05/30/01 (0)
- Re: Need Help Removing Rotor On 80 HP Mercury - WALT 20:52:03 05/20/01 (0)
Mitchell 309 - harold 21:54:50 05/18/01 (0)
Zinks & saltwater - Weldon 20:34:50 05/18/01 (0)
7.5 Ted Williams water pump - frank 23:05:50 05/17/01 (2)
- Re: 7.5 Ted Williams water pump - Herb 03:30:09 05/20/01 (0)
- Re: 7.5 Ted Williams water pump - Herb 03:26:36 05/20/01 (0)
7.5 Ward - Tony Malfara 06:59:49 05/17/01 (1)
- Re: 7.5 Ward - Jim Shadd 13:33:44 05/18/01 (0)
person - mike allen 22:37:25 05/16/01 (0)
elgen boat parts - keith 20:44:05 05/16/01 (1)
- Re: elgen boat parts - paul 12:58:36 08/06/01 (0)
Sears 7hp Information please!!! - Roger 19:06:34 05/16/01 (1)
- Re: Sears 7hp Information please!!! - Gerald 05:49:36 05/23/01 (0)
Post A Message!
Ebay items are not welcome here. Do not post them.
Multiple postings, MMF schemes, Chain Letters, People responding to their own postings, items for sale, rent, Ebay notices, fake contests and other rip-offs will be removed and reported to your upstream provider.
Your IP # is being recorded for this purpose.

This is not a for sale bulletin board so do not post items for sale.
Name:
This is not a for sale bulletin board so do not post items for sale.
E-Mail:
This is not a for sale bulletin board so do not post items for sale.
Subject:
This is not a for sale bulletin board so do not post items for sale.
Message:

This is not a for sale or rent bulletin board so do not post items for sale or rent.
Optional Link URL:
This is not a for sale or rent bulletin board so do not post items for sale or rent.
Link Title:
This is not a for sale or rent bulletin board so do not post items for sale or rent.
Optional Image URL:

WWWBoard Was Wrote by Matt Wright. You can find it at Matt's Script Archive

Postings on motors and aluminum boats should be posted on the Aluminum boat and motor repair board Please let's get this board back on the Fishin' track.

Postings on motors and aluminum boats should be posted on the
Aluminum boat and motor repair board
Please let's get this board back on the Fishin' track.